ELECTRIC BLOWER FOR CLEANING MACHINES

ELECTRIC BLOWER DETAILS

2. Rated voltage: 220- 240V
3. Rated frequency: 50-60Hz

HOW TO USE

1 When use for blowing,with nozzle attached to outlet of wind by c.w. turn the nozzle.

2 when use for suction,with nozzle attached to suction port and dust bag attached to outlet of wind.

3 Pressing the switch button,the unit is started .Loosing the switch button,the unit is stopped.when lock button is pressed after unit is started,the unit can continually work and the unit can be stopped if pressed the switch button again.

FOR SAFE OPERATION

2 As the unit is operated the operator must wear a providing can.

3 Before connecting the unit to a wall outllet check that the marked voltage name plate of the unit is same wiyh local power source.If not,the unit may be damaged.

4 Do not use the unit in the places where there is any inflammable liquid of of gas.

5 Do not suck up burned tobacco end and just cutted shred of metal.

6 Do not direct the nozzle to nearby anybody.

7 To prevent the fan is damaged due to increased speed of the motor ,do not obstruct the suction port and outlet of wind.

8 Do not pull on the power cord to disconnect the unit from the mains outlet or to move it.

Keep the power cord away from high temperature substance. Such as shred of metal and grease.

ELECTRIC BLOWER FEATURES

Powerful motor produces great wind pressure and volume to double work efficiency.

Before maintenance must disconnect the unit from power source.Check the carbon brushes at regular intervals. It is must be replaced with new brushes when it is shorter than 6mm. Remove brush covers and brushes by screwdriver,then insert new brushes and turn brush covers to tighten.