Drilling Machine for Glass Yd-HD-5/80mA

Specifications

Drilling machine for glass
For flat glass, with two drills
Glass thickness: 3-30mm
Hole diameter: 4-80mm
Tolerance: +/-0.2mm

Drilling glass machine /  Drilling machine for glass

 

 

1.  Two drilling spindles, one at the lower side and another upper. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side if the glass. Then the upper spindle will drill the top side of the glass and thus, the hole is drilled through.

 

2.  The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss.

 

3.  Tapping or chamfering can be made on the hole for particularly purpose.

 

4.  The spindle design is sophisticated such that it is strong enough for 24 hours running a day. The rigid and anticorrosive spindle enables maintenance free.

 

5. Customer designed drilling machine available. With extra diameter, glass size.

 

Advantages

• Adopts PLC control and Oil pressure buffer technology
• Operation can be a single cycle, continuous cycle
• Fast drilling with high quality  
• Movable coordinate location, High precision of perforation pitch