DMF-Series Mass Hot Water Flow Meter

Specifications 1. Accuracy:0.2%; 0.15%; 0.10%;

2. Output signal:4-20mA+0-10KHz+RS485/Hart protocol

3. Material: SS316L Stainless Steel;HC-22

      Product Name:    DMF-Series Mass Hot Water Flow Meter Product Description Micro Flow Meter ---- DMF-1-1, DMF-1-2

Model	DN	Measurement scope(kg/h)	Work Pressure (MPa)	Connection type (mm)
DMF-1-1-AB	1.5	0~4	0~32	Weld Joints Φ6×1.5
DMF-1-1-A	3	0~40	0~32	Weld Joints Φ6×1.5
DMF-1-1-B	6	0~100	0~25	Weld Joints Φ10×2
DMF-1-2-A	8	0~200	0~20	Weld Joints Φ10×1

  Medium-Small Flow Meter ---- DMF-1-3, DMF-1-4, DMF-1-5

Model	DN	Measurement scope(kg/h)	Work Pressure (MPa)	Connection type (mm)
DMF-1-3-A	12	0~500	0~25	Weld Joints Φ20×4
DMF-1-3-B	14	0~1000	0~25	Weld Joints Φ20×3
DMF-1-4	16	0~3000	0~25	Weld Joints Φ20×2
DMF-1-5-A	25	0~10000	0~25	Weld Joints Φ31×3

  Large-scale Flow Meter- DMF-1-3, DMF-1-4, DMF-1-5, DMF-1-6

Model	DN	Measurement scope (t/h)	Work Pressure (MPa)	Connection Type(mm)
DMF-1-3-A	10	0-0.5	0~4	Flange  10
DMF-1-3-B	15	0-1.0	0~4	Flange 15
DMF-1-4	20	0-3.0	0~4	Flange 20
DMF-1-5-A	25	0-10	0~4	Flange 25
DMF-1-5-B	40	0-20	0~4	Flange 40
DMF-1-6-A	50	0-30	0~4	Flange 50
DMF-1-6-AB	65	0-50	0~4	Flange 65
DMF-1-6-B	80	0-100	0~4	Flange 80
DMF-1-6-C	100	0-150	0~4	Flange 100
DMF-1-6-D	150	0-300	0~2	Flange 150
DMF-1-6-E	200	0-500	0~2	Flange 150

   

Main Technical Parameters
Medium	liquid, gas, solid, or two phases and three phases mixed fluid
Measurement Scope	0~500t/h
Accuracy	±0.2%~±0.1%
Work pressure	(0~32) MPa (in case of other high pressure, it must be of special order)
Medium temperature; measurement accuracy	50°C~ +350°C; ±1°C
Environment temperature	-20°C ~ +70°C
Output signal:	(1) 4-20mA current signal of flow, with load resistance ≤500Ω
	(2) 0-10KHz frequency signal of flow.
	(3) RS485 Communication protocol
	(4)Hart protocol
Power supply voltage	24VDC
Material of measuring pipe	316L stainless steel
Response time	0.1s~5s, adjustable
Explosion-proof grade	Ex(ib)II BT2-T5

  Our Services Typical cased of different fields: 1. CNG Used in Cars:     2. Chemical Field:  3. Uncart. Oil Depot:  4. Used in Ships:  5. Cases in Bangladesh:     Company Information   Beijing Sincerity Automatic Equipment Co,. Ltd is the manufacturer of producing Coriolis Mass Flow Meters. Our company was reformed from the China Petroleum &Chemical Corporation's Beijing Research Institute of Chemical Industries in 2006.   We have particular professional formula to produce the measuring pipeline compared to the other producing factories. Zeropoint Stability is good. Medium with tiny flow rate could be measured precisely, which reaches a minimum of 0- 1kg/h. Gas with either low pressure or with high pressure could be measured as well. Give us your problems, and you will never be disappointed!    Product Line:     FAQ   Q: Why choosing Coriolis Mass Flow Meters but not the other flow meters?   A:   Coriolis mass flow meters has huge difference with the volumetric flow meters.   All the other flow meters except the Coriolis mass flow meters could be called as volumetric flow meters, including, turbine flow meters, thermal mass flow meters, vortex flow meters, electromagnetic flow meters, etc.   For the Coriolis Mass Flow meters: The measurement of the Coriolis Mass Flow meters will NOT be influenced by the factors of temperature, pressure, density, viscosity, etc. And the compensation calculation is NOT required. The accuracy of the Coriolis Mass Flow Meters is ±0.1%, ±0.2% . The accuracy will NOT be influenced by the factors mentioned above. Compared to this, For the Volumetric Flow Meters:   The measurement of the volumetric flow meters WILL BE influenced by the factors of temperature, pressure, density, viscosity, etc. And the compensation calculation IS REQUIRED. The accuracy of the volumetric flow meters  is said to be reached by ±0.5%. While, the actual accuracy is hard to reach this level of ±1%. The accuracy will be influenced by factors as mentioned above.