Diamond Pathology Laboratory Bone Wire Band Saw

The Diamond Replacements Band Saw Blades also made to Mar-Med Bone Saw,Pathology Band Saw and Bone Band Saw,It Easily cut a wide range of bones, including difficult femoral heads, with Diamond  Bone Band Cutting Saw. This saw makes simultaneous, parallel cuts to allow removal of a slice of bone for processing.
Sometimes,It named diamond band saw blade  features a diamond coating that extends seamlessly along the edge of the entire blade. Continuous blades may serve many different purposes and be used to cut a wide variety of hard marterials.
Using high quality grit electroplated to the blade edge - HANS provides a diamond band saw blade that can offer precise cutting, minimal material loss, and superior band life. Regardless of what material you`re cutting - quartz, glass, carbon, silicon, ceramics, or composites = our specially formulated steel backing will lend exceptional strength and flexibility to you diamond band saw blade. All blades are cut and welded to customer specification with a weld guarantee that lasts the life of the blade.
Industrial production processes require cutting of a large number of materials. Diamond band saws are gaining ever greater importance in this process. The diamond band saw blade has proved to be a successful solution in many applications. It comprises a commercially available band saw, coated with an electroplated diamond layer, so it can be used on practically all band sawing machines. These band saws have been developed by focusing on the application requirements and leveraging Winter's extensive experience in designing and manufacturing diamond abrasive tools. 
Notes on selection of bandsaw type

1. Bandsaw cross section

1. The cross section should be specified as wide and as thick as possible. However, note the diameter of the pulley. Band thickness (dimension E) should be in the range 1:1000 with respect to the diameter of the pulley. Band height (dimension F) is determined by the type of cut. For straight cuts, specify the maximum possible band height. For contours, band height should be selected as follows:

1. Smallest cuttable radius (mm)       16  40  65  95  145  185  305

1. Band height (mm)                           6   10  12  15   20    25    30 

1. Cutting edge / tooth shape

1. In principle, cutting edge S37B can be used for cutting all materials. This cutting edge is recommended for thin-walled and delicate materials. If segmented edges are used, there should always be two teeth simultaneously engaging the material. The advantages of segmented design are better transport of coolant and better chip removal, with softer, longchipping materials. However, the cut edge on the material is somewhat rougher.

1. Diamond grit size

1. Specification depends on the desired surface finish, cutting characteristics of the material, cutting width and machine parameters. Long-chipping materials should be cut with coarser grit sizes.