Developer Liquid / Fixer Liquid

Developer Liquid / Fixer Liquid


Directions for Use
This product is a concentrate Kit suitable for automatic machine processing of normal medical radiographic films, computerized tomographic (CT) films etc, made by Kodak, Fuji, Agfa and domestic film manufactures.

Specifications:


Developer Liquid
One carton include:
Component A5LX2Red Label
Component B0.5LX2Red Label
Component C0.5LX2Red Label
One carton to make 40 litres (20 litres x 2) Developer working solution.

Fixer Liquid
One carton include:
Component A5LX2Blue Label
Component B1LX2Blue Label
One carton to make 40 litres (20litres x 2) Fixer working solution.

Developer Working Solution Preparation Program:
1. Add 26L of warm water in a suitable tank.
2. Add slowly the whole component A with gentle agitation.
3. Add slowly the component B with gentle agitation.
4. Add slowly the component C with gentle agitation.
5. Add slowly the prepared solution until thoroughly uniform.
The same procedure is used for preparing the fixer solution.

Notices:
1. Never mix up any fixer with the developer.
2. All containers must bc clean, thus require necessary protection devices.
3. The processing chemicals are irritant, thus require necessary protection devices.
4. The development temperature is normally 30-35 centigrade, should be set as required.
5. The shelf life of this product is 24 months.
6. Each unit packing is supplied for preparing 40L of working solutions for the development and fixing respectively.