Technical specification Size: Forming Part:10000mm × 1500mm × 2200mm Curving Part: 1800mm× 1400mm × 2000mm Total weight: About 18000KG Material of bending leaf: Stainless Steel Thickness of bending leaf: 12mm Cutting Material: Cr12,1MoV, Heat treatment Cutting type: Hydraulic / Mechanical controlling cutting Total motor power: 18.5KW Forming Power: 7.5KW Bending Power: 4.0KW Cutting Power: 4.0KW Conical Power: 3.0KW Material of rollers: 45# steel,quenched HRC 58-62 Material of shafts: 45# steel, adjusted Step of rollers: 13 Applicable Span: 42m max. Width of the Panel: Feeding width:1250mm Finished width800mm Operating factor of the panel:64% Thickness of the Panel: 0.8-1.5mm Working Speed: Straight Sheet: 15m/min Arch Sheet: 13m/min Seaming: 6m/min Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement Controlling system: PLC Advantages a. The feeding width has different sizes for different clients. b. With diesel truck and 8t crane,only one step you can finish the panels you need and no workers are needed to hold and carry the panel. c. The machine is set up and producing panels within minutes of arriving at the construction on site. d. Our machines make largest span(Building Width)43m,and the buildings made by our machinescan withstand heavy wind and snow,even though in Russian areas. Accessories