Cosmetic Plastic Tube Filling Sealing Machine (XPZF-60Y)

XPZF-60 Automatic Tube Filler is applicable for the filling and sealing of laminate tube and aluminum-plastic tube.
Technical Parameter
Production Speed: 60 Tubes/min
Filling volume: 5-250 ml/tube
Filling precision≤±1%
Indoor temperature (18-26°C)
Main motor (1.1Kw)
External dimension: 1.95×1×1.87(m)
Remark: The height of machine including stirring device is 2.28m
Net Weight: 950kg
Working pressure: 0.6Mpa

Power is three phases, four wires AC, zero line is no less than 2.5mm² and should be proper grounded.
Voltage(V): 380
Frequency(Hz): 50
Heating power (KW)   : 3
Current(A): 25-30
Tube diameter(mm): 13-50
Tube length(mm): Max 200(Tube Cap Included)
Consumption of the compressed air(L/min)≤1100
Noise level(dB): 75
Voltage variation   :(±10%)
Heating preservation double Jecketed (Kw): 2(Option)
Stirrer motor (W): AC180(option)
Fixed scalar step motor(W): 80
Clean Compressor Air is needed
Compressor air pressure is 0.6MPa & Air volume ≤1.1m³/min
Counter as standard function
Machine stops when counting amount.
Alarm System for failure and no tubes.
No Tube, No Filling.
Automatic Tube Loading and Photo Register Function
Automatic filling, with additional blow off the thick material when finish filling (Suitable for viscidity materials)
Automatic stamping code
Automatic tube discharge
Driving part is closed under the platform, safe and no pollution.
The filling and end sealing part is installed in the semi-closed and no static electricity visible cover above the platform so it is easy to observe and operate.
Machine surface is smooth, even, no blind corner, nontoxic, odorless, no pollution, and is easy to clean and maintain.
The machine, with compact construction is easy to operate, which is applicable in such fields as medicine, foodstuffs, daily chemical articles etc.