Construction machinery rebar cutting machine

Product Description

GQ40/50/60 Rebar Cutting Machine can be applied to cut the common carbon steel rod, hot rolled steel,deformed bar,flat steel,square steel and angle steel in machine processing and construction porjects.

Product Parameter

Model	GQ40
Cutting Range	Commom carbon steel≤40mm
	HRB400 Deformed bar≤32mm
	Max flat steel：70*15mm
	Max square steel：32*32mm
	Max angle steel：50*50mm
Motor Power	3.0KW
Voltage	3-380V-50HZ customizable
Motor Speed	2880 r/min
Weight	440kg
Dimension	1280*470*730mm

Features
1. The head is solid and the casing is made of high-quality nodular graphite; the reinforced body has a small volume, a compact structure, and is solid and reliable.

2. The fixing bolts of the pressure plate are transparent (the pressure plate is not easy to loosen or damage).
3. Good lubrication performance. It adopts a closed structure and uses gear splash lubrication. Adding about 8KG of gear oil at a time can work continuously for two months.
4. Low functional loss. Due to the improvement of lubrication conditions, the gear end adopts rolling bearings with low resistance. Compared with the same type of cutting machine, the power consumption can be greatly reduced under load.
5. Using high rigidity tool holder, connecting rod, high speed national standard motor, the quality is more stable and the service life is longer.
6. This machine is equipped with a phase sequence relay, the machine does not reverse. When the power is turned on and the green button switch is turned on, the machine cannot operate normally (the machine is in the reverse state at this time), just reverse any two power cords.

7. The clutch shaft cover is installed at the clutch of this machine, and the tension spring of the clutch can be replaced without disassembling the whole machine.