Construction Hardware Hot Galvanized Steel Veneer Anchor Plates for Masonry

Specifications 1.Veneer Anchor Plates

2.Material :Hot Galvanized Steel ,Stainless Steel

3.Size:14 or 12 gauge

4.Manufacturer

DESCRIPTION Used to anchor veneer to most structural backings. Requires two screws or one expansion anchor to attach the plate to backing. FINISHES can be furnished either mill galvanized, hot dipped galvanized or from Type 304 Stainless Steel. Anchors are available to accommodate insulation thicknesses that range from ½” to 3” in ½” increments. DIMENSIONS The plate is available in 14 or 12 gauge thickness SPECIAL NOTES Other lengths and widths are available. Veneer anchor assemblies are for use where the struc­tural backing exists or where cast-in-place anchors have been left out of the concrete. The typical backing can be wood or metal stud with sheathing construc­tion, CMU, brick, precast concrete or poured-in-place concrete. To attach anchors to wood stud construction, use the DA808 Wood Stud Screw - Corrosion Protected, for steel stud construction use either the DA807 Metal Stud Veneer Screw - Copolymer Coated or the DA995 Stainless Steel Screw - Type 300 Series. For attach­ment to CMU, brick or concrete use either the DA5410 or DA5610 Expansion Anchor.  Certain anchor assemblies, are primarily intend­ed for use where no insulation is required in the cavity. Other anchor assemblies are recommend­ed for use in insulated cavity construction, for use in seismic conditions or in composite walls.