Combined Type of Low Dew Point Compressed Air Dryer

Specifications 1.high efficient and high quality

2.easy to install and use

3.effective drying

4.low dew point

5.easy maintenance

Combined Type of Low Dew Point Compressed Air Dryer >>The process of combined type of low dew point compressed air dryer is different from freezing dryer, adsorption dryer, and even series connection method of freezing dryer with adsorption dryer. Therefore, it has high technical performance and promotion of the value to reach lower the dew point, with minimal energy consumption. Compact integration of the two machines makes it easy to install and use, effective drying, and low dew point. Dryer has more than 3 times of service life to save maintenance costs, using less consumption of regeneration and energy conservation. Adopts single-chip microcomputer, to achieve operational control of the automation
>>Pipe design is strict accordance with industry standards, corporate standards and ISO9001 quality management system, with easy maintenance.
>>Regeneration is divided into two methods, namely electric heating and natural heating. The procedures include regeneration and isopressing, which can maintain stable low dew point.
>>It adopts gaseous diffusion device to make the airflow in the tower distribute evenly to avoid channeling. Common Parameters >>Regenerated air consumption:3%-4%
>>Dew point of finished product:-40°C~-70°C
>>Intake air temperature:≤45°C
>>Switching cycle:heatless10-40min(adjustable) Tepid180min
>>Regeneration mode: heatless or tepid
>>Cooling mode: Water cooling, air cooling
>>Oil content of air intake:≤0.1ppm
>>Pressure loss:≤0.05MPa
>>Power:AC220V/380V/50Hz
>>Inlet pressure:0.4MPa~1.0MPa
>>Adsorbent:Alumina(AL203) or Molecular sieve(13X) Running Condition >>Installation condition: with well-ventilated, with less dust.
>>Installation sites: smooth without foundation, 80 cm distance from the wall  Technical Parameters of Combined Type of Low Dew Point Compressed Air Dryer

Models	Air processing volume(Nm3/min)	Filling volume of adsorbent(kg)	Cooling capacity(kw)	Tube connected to air	Net weight(kg)
KXZ-001NF	1.6	23	3/8	G1"	350
KXZ-003NF	3.8	63	1	G1.5"	500
KXZ-006NF	6.8	123	2	G1.5"	710
KXZ-008NF	8.5	157	2.25	G2"	900
KXZ-010NF	10.5	197	2.75	G2"	1100
KXZ-012NW	14.5	240	3	G2"	1200
KXZ-015NW	1705	299	4	DN65	1300
KXZ-020NW	23	399	5	DN80	1800
KXZ-02NW	28	490	6.5	DN80	2300
KXZ-030NW	35	588	7.5	DN80	2700
KXZ-040NW	45	784	10	DN100	3000
KXZ-050NW	55	974	12.5	DN100	3400
KXZ-060NW	65	1136	15	DN125	3800
KXZ-080NW	85	1800	20	DN125	5100
KXZ-100NW	115	2300	25	DN150	6200
KXZ-120NW	130	2367	30	DN150	7100
KXZ-150NW	160	3750	40	DN200	8200
KXZ-200NW	210	5000	50	DN200	10500
KXZ-250NW	260	6250	60	DN250	13500
KXZ-300NW	320	7500	75	DN250	15780

Note:1. Below Nm3/min (inclusive) of air-cooling machines to accept orders 2. The parameters shall be changed without future notice. 3. Special specifications are acceptable   PICTURES OF OUR PRODUCTS     OUR WORKSHOP     OFFICE