Equipment Features and Technical Advantages
(1) Pipe end truncation and oblique section of pipe end;
Able to direct rotary cutting at the end of pipe, also can oblique section of pipe end.
(2) The diameter of intersecting line cutting;
Able to cut for holes of cylinder intersecting(line) in different directions and different diameters on the head of pipe, and does not require customers to drawing but software generated directly, meeting the requirement about eccentric /non-eccentric vertical intersection of main tube axis and auxiliary tube axis.
Suitable for cutting of auxiliary tube end of cylinder intersection line, meeting the requirement about vertical eccentric/non-eccentric intersection or oblique intersection of main tube axis and auxiliary tube axis.
(3) All intersecting of round tube and plane cutting, round tube and square tube cutting are achieved perfectly;
(4) Can cut a square hole and waist hole in tube;
(5) Arbitrary curve graph cut;
Support to processing arbitrary complex curves, not subject to restriction of graphics.
(6) Support 2D and 3D format cutting;
Currently on the market Only by using 3D UG drawing, support 3D graphics laser cutting system, easy operating.
(7) DOT line in tube;
Support high-speed DOT line on the surface of the tube, only marking but no cutting, with curve mark on pipe surface.
(8) Able to drill hole in tube;
Rotating laser drill hole in tube wall, can be dividing punch, the minimum diameter of hole is 0.3mm.
Applicable Materials
Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
Applicable Industry
It is widely applied in fabrication industries of advertising trademark, metal structure, cabinets, metal processing, electrical cubicle switchboard, textile machinery, cereal processing machinery, kitchenware, lamps and lanterns, automobile, metal handicraft article, saw blade, electrical component, medical apparatus and instruments, aero-space, ironware, cutting and measuring tool, etc.
Model Type |
GN-CT6000-850 |
Laser Working Medium |
Nd+3:YAG |
Laser Wavelength |
1064 nm |
Maximum Output Power |
850W |
Optional power |
850W/1200W |
Pulse wide |
0.3~20 ms |
Pulse Frequency |
1~300 Hz |
Laser Power Stability |
≤±3 % |
Tube processing area(length×tube diameter) |
3000mm×Φ20-240mm |
Maximum tube cutting thickness |
≤12mm |
Effective tube cutting diameter |
Φ20-240 |
Effective tube cutting length |
6000mm |
X-axis route |
300mm |
Y-axis route |
6000mm |
Z-axis route |
120mm |
U1-axis route |
Infinite rotate |
U2-axis route |
Infinite rotate |
Axial positioning accuracy |
≤ ± 15secs |
Repeat positioning accuracy |
≤ ± 2secs |
X.Y.Z single axial maximum positioning speed |
40 m/min |
U1-axis and U2-axis maximum positioning speed |
35rpm |
Cutting system |
GNLASER 3D tube processing system |