CNC Monitor Replacement Video Converter (GBS 8219)

Model No: GBS-8219
Widely used in Siemens SIMATIC S5 6AV1242-0AB10 RGB monitor repare or replace, CGA Monitor Replacement, EGA Monitor Replacement, Monochrome MDA Monitor Replacement, Mitsubishi CNC Monitors replacement, Siemens industrial monitors replacement, num 760 monitor replacement etc

8219

Based on the GBS 8218(XRGB BOX), newly released XVGA BOX(RGB, MDA, CGA, EGA to VGA Converter) was launched of an innovative industrial Video Converter, GBS 8219 video converter of industrial fully automated operation, be able to convert all Rgbhv, Rgbs, RGB, MDA, CGA, EGA signal to VGA signal, and was widely for various kinds of FHKD, such as Digital Control Machine Tool Display, DCS Display, injection molding machine, analytical instrument, Specialized Display of navigation and import production line, armamentarium, Specialized Display of airport, railway and financial facility, Special size Display, Specialized Display of imported PSP, Bowling and other recreational facilities, etc.

Input
Signals
MDA\CGA\EGA\RGB\RGB Sog\RGBS\RGBHV\YPbPr

Interface
5BNC, 9pin\3pin\6pin\14pin\20pin\25pin

Horizontal Frequency Rate(H)
12kHz to 40kHz automatically recognized

Output
Supports
D-15pin standard VGA/SVGA, Resolution: 800*600/60Hz, 640*480/60Hz

Interface
D-SUB 15 PIN standard VGA port

Power
DC 12V 1.0A

Note: 1. YPbPr = YUV 2. Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized. 3. Support RGB and YPbPr 4. Support Interlaced Scanning and Line by Line Scanning. 5. Support Vertical Resolution from line200 to line 600 automatically recognized. 6. Support variable Horizontal Resolution automatically recognized. 7. Support RGBHV (separate sync), RGBS (composite sync), automatically recognized 8. Output resolution: 800*600/60Hz standard VGA or custom-resolution.

MENU
Use to adjustscreen /programming

DC12
Power inputDC12V, 1A

Table 4.1 Definition for Input Channel II:

PIN InputSignal

P1(GND)
Connect to the ground

P2(GND)
Connect to the ground

P3(R)
Connect R(ED) interface of the input device

P4(G)
Connect G(reen) interface of the input device

P5(B)
Connect B(lue) interface of the input device

P6
Undefined(null)

P7
Undefined(null)

P8(H)
Connect H(CS) interface of the input device

P9(V)
Connect V interface of the input device

Figure 4.1 Definition for Input Channel II

Table 4.2 Definition for Input Channel I: BNC
Input Signal
Connection image

Pb\Y\Pr
YPbPr input signal (right image) Interface: Three BNC slot, connected to the corresponding Pb, Y, Pr interface, then Y monochrome port.

Figure 4.2 Analog 3BNC (YPbPr) Input.

R\G\B
RGB Sog input signal (right image) Interface: Three BNC slot, connected to the corresponding R, G, B slot, then G monochrome port.

Figure 4.3 Analog 3BNC (RGB Sog) Input.

R\G\B\S
RGBS CS Composite Sync (right image) Interfaces: 4 BNC slot, connected to the corresponding R, G, B, S I, monochrome then G, S I

Figure 4.4 Analog 4BNC (RGBS CS) Input.

R\G\B\H\V
RGBHV separate sync (right image) Interface: 5 BNC port, connected to the corresponding R, G, B, H, V I, monochrome then G, H, V I

Figure 4.5 Analog 5BNC (RGBHV) Input.
Operation Menu:

Item
Spec.

MENU
-press it to enter into OSD menu -click it once to select and click again to exit the current line

"+"
-click it to move the cursor up -click it to add the value

"-"
-click it to move the cursor down -click it to deduct the value