Classical Type Waste PET Washing Machine

MT-1000 Classical Type Waste PET Washing MachineIntroductionMaterial: Baled or loose PET bottlesFunction: Used for crushing and washing and drying of PET bottlesCapacity: 1000 KG Per HourFinished Product QualityFinished product size: 12-16mm or customizedMoisture content: <1%PVC content: Less than 150ppmpH: 7.5 +/- 0.5Purpose of use: Polyester strap/fiber/sheet/filmProduction Process1. Label Separation — 2. Manual Sorting — 3. Size Reduction — 4.1st Washing & Density Separation — 5.1st Friction Washing — 6. Hot Washing — 7.2ND Friction Washing — 8.2ND Washing & Density Separation— 9. Moisture Removal — 10. Product CollectingMain Machine & FunctionLabel RemoverΔ Used to peeling the labels from plastic bottles by high speed bladesΔ Working with waterΔ Label separation rate >95% (for round bottle)CrusherΔ Used for size reduction of plastic bottles into flakesΔ Cross-cut rotor design specially for plastic bottle crushingΔ Capacity: 1200-1500kg/hr (screen mesh size: 18mm)Sink-Float TankΔ Used to washing the PET flakes and density separation floating contamination from flakesΔ Sink-float tank designed with 4PCS automatic drums on top for manpower savingFriction WasherΔ Used to scrubbing the flakes by high speed blades to remove dirt and waterΔ High speed (1440rpm) for superior performanceHot Washing TankΔ Used to washing the flakes by hot water to remove glue and greasy dirtΔ Feeding caustic soda/detergent to washΔ Heating by electricity or customizedΔ Tank outside with heating protecting layer made of rockwoolDrying MachineΔ Including dewatering machine and hot air drying systemΔ Used to reducing moisture content remain from the flakes by high speed blades and hot airΔ Rotary speed of dewatering machine: 1440rpmΔ Drying system heating by electricityΔ Final moisture content remain <1%Electric Control CabinetΔ With thermal relay to projecting the enginΔ With overloaded alarm and protecting systemΔ With emergency shut off controlOptional MachinesBale BreakerΔ Used to breaking bottle bale into loose bottle in front of the label separation unitΔ Four-shaft design fixed with special blades for high efficiencyTrommel SeparatorΔ Used to loosening the bottles and screening out the dirt, sand, soil from bottlesΔ Installed in front of label separation unitMetal DetectorΔ Used to detecting metals from bottles, separating out the metals to protect crusher from damagingΔ Installed behind sorting tableZigzag Label Flake & Dust SeparatorΔ Used to sucking out the label flake remain and fine dust from finished productΔ Installed in front of collecting silo