1 / 5
Model No. : | JHSD E |
---|---|
Brand Name : | Jiahong |
Product description
China Supplier High Quality Snow Melting Controls |
Pre-assembled and ready to install, the cable prevents pipes from freezing by keeping water flowing to -40°C. Using an energy saving thermostat, JHSD cables operate on 230 AC Voltage and suit the use on water filled plastic and metallic pipes.
Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. |
Cable Construction | Twin conductor |
Rated Voltage | 230 ACV |
Output | 12w/m and 15w/m |
Heating Element Size | 2-25m |
Bending radius | 25mm |
Conductor Insulation | XLPE |
Outer Insulation | PVC |
Minimum Installation Temperature | -10°C |
Cold lead | 2m length with the plug |
WuHu Jiahong New Material Co. Ltd is the largest heating cable manufacturer in Asia-pacific. We are always dedicated to research, develop and produce both constant wattage and self-regulating heating cables since 1993. Till now, Jiahong has obtained more than 30 national patents. We are one of the few members of China self-regulating heating cable national standard GB/T 19835-2005.
|
The warm up time of an electric underfloor heating system will be dictated by the insulation used beneath it and the output of the system. In general, the better insulated the sub-floor the faster the system will warm up, with Underfloor Insulation boards?facilitating a very speedy warm up time of as little as 15 minutes, and un-insulated concrete floors causing the slowest warm up time. Using a?200W system?beneath ceramic/stone tiles provides a faster warm up time than 150W system. |
If you have installed your heating beneath tile adhesive, levelling compound or a screed you must allow this to dry out before turning on your system for the first time. If the system is turned on too early it will force the moisture out of the covering which may lead it to crack. We would recommend speaking to the manufacturer of your flexible tile adhesive, grout or screed to confirm the drying time required. |
We would recommend that each room has its own heating system controlled by its own thermostat. This will allow for simpler and more accurate temperature control of each room and will avoid heating rooms which do not require it. |
Send your inquiry to this supplier