Product Introduction The JPR Micro Micro Powder Grinding Mill Grinding Mill(ultrafine mill) is for super-fine grinding materials with hardness less than 6 in Moh’s scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment and so on. The granularity of the end products is 325-2500 meshes. Product photos
Wroking of Principle: General: Crushing -- Grinding -- Selecting -- Collecting
When the machine works, the grinding roll, under the aaction of high pressure spring and centrifugal force, rolls close up to grinding ring, its rolling pressure ratio is 1.2 times of Raymond mill given an identical condition, and its output may increase 10% to 20%;Please note that when the grinding roller and grinding ring reach a certain degree of abrasion, please adjust the length of high-pressure spring to keep the constant grinding pressure between grinding roller and grinding ring, so as to ensure a stable output and fineness.
Features: Higher output. Its output increases by 10%-20% comparing with Raymond mill under the same power condition. Larger range of final fineness. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh). Good dust control. High Pressure Suspension Mill meets the requirement of national dust-dump standard. Easy to operate. The whole system is combined by some independent systems, and the cohesion between the systems is good. Excellent sealing. The multi-class seals are adopted to keep the grinding equipment tight closed. specification
Model | HGM80 | HGM90 | HGM100 | HGM100A | HGM125 |
Ring Dieter/mm | 800 | 900 | 1000 | 1000 | 1250 |
Ring Under/layer | 3 | 3 | 3 | 4 | 4 |
Roller shaft speed(piece) | 21 | 24 | 27 | 36 | 44 |
Main shaft speed/r.p.min | 230-240 | 200-220 | 180-200 | 180-200 | 135-155 |
Input size/mm | ≤20 |
Finished/mesh | 325-2500 |
Capacity t/h | 0.5-4.5 | 0.6-6.5 | 0.7-7 | 1-8.5 | 1.5-12 |
Motor Power(KW) | 123-145 | 168.35 | 221.6 | 243.95 | 344.4 |
Overall Dimension (L*W*H) | 13.9*4*6.2 | 14.74.87.2 | 18*4.6*8.6 | 18*4.6*8.6 | 14*9*10.25 |
Working place & Environment
Packing & Encasement
Certificates
FAQ 1.We are Manufacturer (Not Dealer):
All machineries from SHANGHAI JIAPURUI MACHINERY CO., LTD are made by ourselves, with lower price, good quality and assured full after service.
2. Training & Service: We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away. 3. If you are new for this business:
Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.
4. We’d like to recommend a suitable model for you and send you a best quotation. So please give us some more information about your requirement in your enquiry. What is the type and size of raw material? What is your required capacity(t/h)? What is required size of final product(mm)? We are looking forward to your replies!