1 / 1
Brand Name : | casion |
---|---|
Type : | Special Structure of Blow Molding Machine |
Product description
Machine Features:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the Ibc Blowing Machine and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Easy installation and starting
13. Low rejection rate: less than 0.1percent.
IBC Barreol Blw Molding Machine
We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers Bottle Blow Molding Machine,2000L one-three layers Extrusion Blow Molding Machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products.
With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 250L-3000L,upto 2-4layers.
Specification |
|
Double L-ring |
IBC |
Max container capacity |
L |
235 |
1000 |
Machine Weight |
T |
21 |
30 |
Machine Dimension(L*W*H) |
M |
7*6*5 |
7*6*5.5 |
Total Power |
Kw |
222 |
326 |
Average Power Consumption |
Kw |
144 |
212 |
Die Head |
|
|
|
Accumulator Volume |
KG |
16 |
50 |
Number of Heating Zone |
Zone |
5 |
6 |
Power of Die Heating |
Kw |
40 |
50 |
Max. Die-pin Diameter |
mm |
250 |
600 |
Extruder Unit |
|
|
|
Screw Diameter |
mm |
125 |
120/120 |
Screw L/D Ratio |
L/D |
28/1 |
28/1 |
Number of Heating Zone |
Zone |
5 |
8 |
Heating Power |
Kw |
27.5 |
44 |
Max. Melting Capacity |
KG/Hr. |
300 |
500 |
Extruder Motor Power |
Kw |
110 |
90/90 |
Clamping Unit |
|
|
|
Max. Mould Size(W*H) |
mm |
1200*1500 |
1200*1500 |
Distance Between Platen |
mm |
800~2400 |
800~2400 |
Platen Size(W*H) |
mm |
1450*1500 |
1450*1500 |
Clamping Force |
KN |
800 |
1200 |
Hydraulic System |
|
|
|
Main Oil Pump Power |
Kw |
30 |
45 |
Servo Oil Pump Power |
Kw |
7.5 |
7.5 |
Thickness Controll System |
Point |
100 |
100 |
Send your inquiry to this supplier