Product description
The indoor unit can be installed on the floor or on the ceiling, it is determined by your actual need, it greatly decreases the space needed and also it can provide the same level of comfort, at the same time make service and installation more convenient and flexible
The units cover an air flow range of 340 to 2,380m³/h nominal
The standard unit consists of a coil section, suitable for both chilled/hot water, a fan section with a direct driven centrifugal fan and a flat filter
All coils are constructed of 3/8 inch diameter copper tubes mechanically expanded into aluminum fins
The coil fins are spaced at 10 fins per inches standard
All coils are tested at 450 Psig air pressure and are suitable for up to 250 Psig working pressure (with manual air vent, piped to the drain pan)
All units are provided with forward curved centrifugal fans of the double inlet type that are designed for maximum efficiency and uniform are distribution
The fans are statically and dynamically balanced to ensure quiet operation and optimal performance
All fans are of the direct driven type
Motors are driven by permanent split capacitor electric motors and are of the three-speed type (with internal thermal protection)
A condensate pump is mounted inside of the cassette indoor unit
The condensate can be pumped up to 760mm from the drip tray
The filer adopts the push-open design for easy dust filter change
The air filter can be removed and washed by water or vacuum for easy and convenient cleaning
In order to realize the comfortable soace with uniform temperature, the air conditioner uses two stepping motors to adjust the airflow automatically, send the air to every corner of the room
The air flow direction can be controlled in 5 steps from up to down and from left to right, more selectable, more flexible
