CE And FDA cleared Multi Co2 Fractional Laser Machine For S

CE and FDA cleared Multi Co2 Fractional Laser Machine for scar removal

Specifications

General Specification	Wavelength	10.6μm, far-infrared laser
	Aiming Beam	Less than 2mW, red semiconductor laser
Scan Mode	Laser Energy	5-45mj, step value 5mj
	Figure Option	1. Square or rectangle, min 3×3mm; max 20×20mm, step value 1mm. 2. Round, min 3mm (diameter), max 20mm (diameter), step value 1mm. 3. Ellipse, min 3×8mm, max, 15×20mm, step value 3mm.
	Energy Repeat	1-5 (When increasing energy repeat, laser energy is increased synchronously, max total energy 225mj.)
	Dot Density	36/49/64/100/144/225 dots in 1cm2
	Mode	Normal: scan sequentially line by line. Random:scan randomly, to decrease thermal accumulation. This function is not available for rectangle.
Normal Mode	Laser Energy	1-30W, step value 1W
	Super (Pulse)	1. Average power: 1w~30w; 2. Pulse frequency: 300Hz~950Hz optional
	Single(Pulse)	1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional
	Continuous Wave	1w~30w
	Repeat	1. Average power: 1w~30w; 2. Pulse duration: 0.1s~1s optional,off time1ms
Dimension		73*66*130cm
Weight		50Kg

Application

1. Perfect resurfacing result with short recovery time.

2. No consumable components.

3. CE Approved quality,

4. Imported Laser Source from Coherent for guaranteed quality.

5. Two Working Mode: Scan and Normal for multi-function treatment.

Advantages:

1. The TUV medical CE approved;

2. Normal and scan mode for choice;

3. Far-infrared laser Aiming beam

4. metal Tube is imported from U.S.A

5. The lifetime of the machine is more than 20,000 hours

6. Fan cooling, do not need to add water.

7. Particular designed intelligent laser control system ensures a precise treatment

8. RF-exited CO2 laser energy shooting is an even steady and safe treatment process.

9. Wide range application, effective treatment

10. Easy and fast treatment.

11. Large-sized colorful touch screen, with maniable handpiece.

Description

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot, or pixel-like treatment zones within the selected target area of the skin, leaving the other zones within it perfectly intact.

Therefore, the heat of laser only passes deeply through the factional damaged area. This allows the skin to heal much faster than the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.

1. Skin with problems before treatment 2. Fractional laser works on the skin

3. Thousands of mirco-thermal zones are 4. More collagen is produced during

produced activate skin resurfacing. self-resurfacing.