Cavity Fixings Spring Anchor toggle Bolt with C-Hook

Specifications 1)Cavity Fixings Spring toggle with C-Hook

2)Material:carbon steel

3)Finish:Zinc Plated

4)Size: M3 ,M4

5) Manufacturer

Description Suitable for:       • Prestressed hollow-core concrete slabs             • Gypsum plasterboard and gypsum fiberboards             •Chip boards and slabs made of perforated bricks             • Hollow concrete blocks etc. For fixing of:             • Pictures             •Lamps             • Electric switches             • Key boxes             •Small wall-mounted shelves             • Towel rails             •Lightweight mirror cabinets             •Curtain rails             •Cable and pipe clips             • Cable trays   Nylon toggle K 54             • Cavity fixing with a tilting crosspiece for woodscrews, 4 mm diameter Spring toggle KD/ KDH 3/4            •Expands by spring force into any cavity. Gravity toggle KD/ KDH 5/6/8            •Has a tilting crosspiece which automatically locks itself in cavities. KM 10           •Specially designed for fixing washstands and urinals to plumbing units and cavity walls. Advantages/benefits           • Surface-flush Nylon toggle K54 allows the attached item to be removed and refitted several times.           • KD and KDH toggles are specially designed for small cavity depths.           • All KD and KDH are fully zinc-plated for good corrosion protection.           •Long threaded rods allow large wall thicknesses to be bridged. Material Carbon Steel  Surface treatment Yellow or White Zinc Plated  Min 5 um ,Cr3+ Technical Date

Type	Drill-Ø[mm]	Max. panel thickness[mm]	Min. cavity depth[mm]	Anchor length[mm]	Thread
KD3 (Screw ,Washer)	12	65	27	95	M 3 x 90
KDH 3 (Hook ,Washer ,Nut)	12	51	27	105	M 3 x 80
KDR3 (Closed Eye ,Nut ,Washer)	12	65	27	95	M 3 x 90
KD4(Screw ,Washer)	14	69	34	105	M 4 x 100
KDH4 (Hook ,Washer ,Nut)	14	35	34	95	M 4 x 70
KDR4 (Closed Eye ,Nut ,Washer)	14	69	34	105	M 4 x 100

 
Type of installationInstallation          • Pre-positioned installation Installation tips         •Observe the cavity depth and board thickness (see the table).         •KD 5 to 8, KDH 5 to 8 and KM 10 toggles cannot be installed pointing downwards (e.g. floor).