Specifications 1. Light weight, easy to use it
2. High cost performance
3. Excellent strength and stiffness
3. Wide application range
Technical Parameters:
Property Index of Products | Carbon Fiber Sheet (Grade Ι) | Carbon Fiber Sheet (Grade ΙΙ) |
Tensile Strength | ≥2400Mpa | ≥2000Mpa |
Elastic Modulus | ≥1.6×105Mpa | ≥1.4×105Mpa |
Elongation Percentage | ≥1.7% | ≥1.5% |
Pulling Bonding Strength along with Concrete | ≥2.5Mpa | ≥2.5Mpa |
Interlaminar Sheer Strength | ≥50Mpa | ≥40Mpa |
Volume Content of Fiber | ≥65% | ≥55% |
| HM-1.2T | HM-1.4T |
Thickness (mm) | 1.2 | 1.4 |
Length (m) | 100 | 100 |
Width (mm) | 50,100 | 50,100 |
Density | 1.6 |
You can use them if you want: ü The remedy repair and strengthening of the plate and beam of concrete structures ü The strengthening of the openings around the wall and plate ü The strengthening of beams of wooden buildings, etc ü The strengthening of bridge plate, bridge pier and girder ü The remedy repair and strengthening of tunnel and cable lines Excellent product characteristics: Ø Light weight, easy to use, easy to operate and not require large-scale machinery equipments Ø If there are situations that pipes were put interleaved or subjected to space constraints under the flat plate, operation can be easy Ø When pasting carbon fiber plate, gel adhesive does not flow, can reduce the conservation of the surrounding environment of operation Ø The shape and weight of components are not changed after reinforcement Ø The reinforcement effect of 1 layer of carbon fiber plate is equivalent to 4 to 8 layers of carbon fiber cloth, so that can make the operation become labor-saving Ø Because the strength and stiffness of carbon fiber plate are very high, need not carry out complete paste to structures, with the reduction of surface area to be processed, the generating dust and debris can be reduced consequently Ø When encounter the flat plate of the middle beam or wall, just to cut through the holes which can let carbon fiber plate pass, the reinforcement effect will be improved more The visual inspection is easy to carry out after construction
When you use them you should mind that 1. The construction workers should take necessary productive measures (such as wearing masks, gloves, goggles, etc), notice fire prevention and maintain good ventilation on scene; 2. Carbon fiber is conductive, be careful the electrical equipment around. 3. When the rolled products are untied, carbon plate has the possibility of bounce, please give full attention
Transportation and Storage:The length of this product is 100 m, the width is divided into 50 mm, 100 mm, the thickness is divided into 1.2 mm, 1.4 mm. Roll into a ring and use a belt to bind. Other specifications can be customized.