brass normally closed solenoid valve for water 12v Product Description Body Interface size: 1/2-6’ Flow size: 15-150mm Body material: Copper, Cast iron, stainless steel, plastic Connection type: G thread, flange Pressure class: 0-6bar, 0.6-5bar Structure type: Direct acting, Pilot type (Pipeline need 0.6bar start-up pressure) Control type: Normally close; electricity open, power off closed.
Components Seal material: NBR Ambient temperature: 0℃-65℃ Medium temperature: 0℃-65℃ Installation: According to the body tag to install; In order to enhance the service life, best coil upward, horizontal installation. Coil voltage: AC24V/110V/220V/230V/240V 50/60HZ DC24V/12V ±10% fluctuation allowed Explosion proof class: Without Purpose: Fountain, running spring, jumping springs and other special underwater diving solenoid valve
Outline size drawing
Type specification table
Interface size | Flow size mm | CV | Medium: liquids | Power | Dimensions L×W×H L×H | Model |
Pressure | VA | W | Wrought brass | Stainless steel |
The mini. | The max. | AC | DC |
1/2” | 15 | 4.5 | 0 | 6 | 33 | 33 | 69×117 | PODF-15 | PODF-15B |
3/4” | 20 | 7.6 | 0 | 6 | 33 | 33 | 73×123 | PODF-20 | PODF-20B |
1” | 25 | 12 | 0 | 6 | 33 | 33 | 99×134 | PODF-25 | PODF-25B |
11/4” | 32 | 22 | 0 | 6 | 40 | 40 | 112×172 | PODF-32 | PODF-32B |
11/2” | 40 | 30 | 0 | 6 | 40 | 40 | 123×172 | PODF-40 | PODF-40B |
2” | 50 | 48 | 0 | 6 | 40 | 40 | 168×209 | PODF-50 | PODF-50B |
Flange 4 holes | 65 | 52 | 0.6 | 5 | 33 | 33 | See figure below | PODF-65F | - |
80 | 80 | 0.6 | 5 | 33 | 33 | PODF-80F | - |
100 | 128 | 0.6 | 5 | 33 | 33 | PODF-100F | - |
150 | | 0.6 | 5 | 33 | 33 | PODF-150F | - |
3/4” | 20 | 7.6 | 0 | 6 | 33 | 33 | 73×123 | PODF-20S | Plastic material |
1” | 25 | 12 | 0 | 6 | 33 | 33 | 99×134 | PODF-25S |
Flange connection size drawing
DN | A | B | C | D | E | F | G | N | Material |
DN65 | 185 | 20 | 2 | 185 | 118 | 18 | 145 | 4 | Cast iron |
DN80 | 200 | 20 | 2 | 200 | 132 | 18 | 160 | 4 |
DN100 | 220 | 20 | 3 | 220 | 160 | 18 | 180 | 8 |
DN150 | 285 | 24 | 3 | 285 | 212 | 22 | 240 | 8 |
Packaging & Shipping Packaging
shipping we will ship the goods within one week Our Services installation procedure 1. Please refer to the installation instructions before use 2. Clean the pipe before use ,otherwise install the filter, making sure it can work normally 3. Make sure the solenoid valve and piping installation direction are in the same direction 4. When installing the solenoid valve make sure the coil vertically 5. Heat treatment must be taken when solenoid valve in the frozen place to work 6. Ensure solenoid valve plug-in installation is firm, otherwise it will not work 7. It is better to adopt bypass to the continuous work of solenoid valve, it’s convenient to detection, make sure the normal work.
inspection
application
Company Information Pov valve industry (Shanghai) Co., Ltd. after many years of field experience, R & D and design of products to meet the stringent requirements of today's industrial processing fluid, by creating the most value of quality products, providing personalized service and on-time delivery principle, we gained good reputation. Our success is built on integrity, the full range of control valve. Main products: pneumatic control valve, electric control valve, a valve, pneumatic angle seat valve, pneumatic diaphragm valve, electromagnetic valve etc.