Biomedical Waste Disposal Methods

Biomedical Waste Disposal Methods

Mobile Medical Waste Treatment System (MWM80, MWM160)
Description: Capacity 80kg/cycle and 160kg/cycle, 1t/d-2t/d around, fully automated process, highly integrated on a skid-mounted seat, special designed wing-open container, equipped with dedicated diesel generator.
Application: Suitable for emergency state such as major epidemic and nature disasters, etc.
Characteristics: High mobility and flexibility, all-weather working.

1. Operating Principle
Medical waste are put into autoclave vessel under saturated steam with temperature 134° C(273° F) and pressure 0.22Mpa(32psi) in 45 min to get fully sterilized; Then the sterilized waste sent to shredder to crush into short pieces. The final treated medical with volume reduction of 80% and weight reduction of 20% can achieve the microbial inactivation LOG4 (99.99%) and finally become ordinary city refuse for safe landfill.

2. Complete equipment consists of autoclave system, steam boiler system, shredder system, clean and disinfection unit etc

3. Advantages

1. Energy Efficient
1) Lowest steam needed
2) Extra disposal of effluent and waste gas not needed
3) Low electricity consumption
2. Environmental Friendly
1) Respect strict emission standard worldwide
2) 90% reduction of nuisance odors emission
3) No hazardous emission
3. Easy and Safe
1) Highly automated processing
2) No contact with medical waste both in operation and maintenance
3) Safety assurance by multiple protection system
4. Effective
1) Microbial inactivation test excess LOG4 (99.99%)
2) Waste crushed into unrecognizable pieces
3) 50%-80% reduction of volume & 20% reduction of weight
5. Economical
1) More than 15 years life time
2) Low capital cost investment
3) Lowest operation and maintenance cost

4. Basic Technical Parameter:

MODEL: MWM80
Capacity: 80KG/cycle
Autoclave Loading: Horizontal
Door: Quick Opening Door/ Safety Pin Interlock/Locking Ring
Size: 5870*2250*3200mm
Thermal Source: Saturated Steam
Vacuum Pressure: -0.09Mpa (13psi)
Pre-vacuum Time: 1 min
Post-vacuum Time (cooling down time): 3 min
Sterilization Pressure: 0.22Mpa (32psi)
Sterilization Temperature: 134° C (273° F)
Treatment Cycle: 60 min
Microbial Inactivation: 99.99 %(LOG4)


5. Fully Automated Treatment System
Gient provide a complete line of medical waste treatment equipments as one stop turnkey solution, including ancillary and accessory for customer's options.

Ancillary Equipments for customer's option:
*Steam Boiler
*Autoclave Bin
*Discharge Conveying Unit
*Cleaning and Disinfection unit
*Cold Storage

Gient is the largest manufacturer for steam autoclave system of medical waste treatment in China, we provide the best solution of medical waste management for our customer since 1995.