Best Quality & High Effective Noodle Drying Machine / Dehydrator For Food

Best Quality & High Effective Noodle Drying Machine / Dehydrator For Food Product Description Model:JK03RD,JK06RD,JK10RD Type: Heat Pump Dryer + Drying Chamber  Power Supply:  220V/1PH/50HZ or 380V/3PH/50HZ Heat energy:  75% air source + 25% electric power
Max. Temp:  75℃
Working Temp:  -10~45℃
Functions:  Heating / Cooling / Dehumidify Drying Capacity:  200~2500kg per batch   How Does The Dehydrator Work? 1, Dryer evaporator of refrigerant absorb the air from outside. 2, Then compressor works that make the air temperature rise. 3, Heat exchanger change the hot air into drying chamber. 4, Final fish will be dried by the hot air circulating in drying chamber. KINKAI Heat pump  drying machine has large capacity and easy to operate characteristics. mainly suitable for dehydrated vegetables, fruits etc.agricultural and sideline products, Chinese herbal medicine as well as chemical materials dry. KINKAI drying machine consists of a trolley, drying tray, heat exchanger, blower fan, LCD controller cabinet and drying chamber, The entire machine is made of insulation material and stainless steel,  fully satisfying food hygiene requirement.   Features Advantages Of Noodle Drying Machine: 1. Base frame and external panels are made of galvanized sheet.
2. With intelligent controller and microprocessor high temperature heat pump is specially designed for industry drying .The evaporator is 30% bigger than normal, which could ensure high efficiency and better performance in high ambient temperature. 
3. High temperature drying kinds of foods /medicinal materials/wood and so on , widely using for industry line. 
4. R417A refrigerant is standard for this series, which also is helpful to get better performance in high temperature. 
5. Top air flows with strong blower, better efficiency and lower noise.
6. It increases the evaporator space in air flow direction, which results bigger effective air volume. It had been proved to be better efficiency by our testing. This design is also easier for the defrosting water to drain out.
7. Automatic defrosting function included.
8. Careful protection functions such as: high pressure, low pressure, and anti-freezing, phase order, discharge temp, insufficient water flow,etc.
9. General testing and operational test carried out for every unit before package in the factory.   Parameters  KINKAI heat pump dryer Technical Parameters  

Model		JK03RD	JK06RD	JK10RD
Suitable for drying chamber	m3	10~20	20~30	30~40
Power supply	V/PH/HZ	380/3/50 or 220/1PH/50	380/3/50	380/3/50
Power input	KW	2.8	5.8	10.8
Running current	A	8/17	12.6	22.5
Auxiliary electric heater(option)	KW	9	9	9
Heating capacity	KW	12	26	35
Cooling capacity	KW	7.5	20	25
Dehumidification amount	L/H	8	20	40
Max. hot air Temperature	℃	75	75	75
Working ambient temperature	℃	-10~45	-10~45	-10~45
Refrigerant	Kg	Mixture type/2.5	Mixture type/4.3	Mixture type/8.0
Compressor	Type	Scroll	Scroll	Scroll
	Brand	Copeland/Danfoss	Copeland/Danfoss	Copeland/Danfoss
	Quantity	1	1	2
Noise	dB(A)	60	65	70
Fan motor for drying	Power input/unit	250W/unit	250W/unit	250W/unit
	Wind volume	m3/H	m3/H	2500m3/H/unit
	Recommend  qty	8	8	16units
Heat regenerator size	mm	500*350*350	500*500*580	550*600*680
Fan motor for heat regenerator (dehumidify)	Power input	200W	370W	550W
	Wind volume	2000m3/H	2000m3/H	3500m3/H
	Size(mm)	450*330*380	470*320*470	580*320*580
Wind valve	Power input	6W	6W	6W
	OPEN	Exchange fresh air	Exchange fresh air	Exchange fresh air
	CLOSE	Drying	Drying	Drying
	Size(mm)	480*320*120	630*560*120	720*640*125
Fan motor for evaporator (2 units)	Power input	250W/unit	780W/unit	780W/unit
	Wind volume	4600m3/H	10500m3/H	2*10500m3/H
	Rotate speed	1350RPM	1350R/Min	1350R/Min
Hot air outlet	mm	600*1100	650*1100	860*1485
Hot air return inlet	mm	690*1100	750*1100	1050*1450
Dimension(L*W*H)	mm	1650*960*1280	1720*1160*1280	2100*1460*1590
Net weight	Kg	210	385	480
Gross weight	Kg	240	420	540

  Buying Guides   Recommend Drying Machine+Drying Chamber

Dryer material	Galvanized steel  (Stainless steel for option)
Drying chamber material	Polyurethane Two sides: steel
Heating source	75% air source + 25% electric
Brand name	KINKAI
Model number	JK03RD     JK06RD     JK10RD
Recommend dryer + drying chamber size	Description	Product Capacity	Drying Chamber size
	One unit JK03RD dryer + drying chamber	300Kg / batch	3300*1900*2200mm
	One unit JK06RD dryer + drying chamber	600Kg / batch	6000*2800*2200mm
	One unit JK10RD dryer + drying chamber	1000Kg / batch	6000*3000*2200mm
	Two units JK03RD dryers + drying chamber	1200Kg / batch	7000*2200*2200mm
	Two units JK06RD dryers + drying chamber	1500Kg / batch	10000*2800*2200mm
	Two units JK10RD dryers + drying chamber	2500Kg / batch	10000*3000*2200mm

 Warm prompt: We can make any drying chamber sizes as your required.     Comparation • Old type traditional drying room
1.Drying process is difficult to meet the requirements of food hygiene;;
2.Much coal dust, and finished goods bleak in clolor;
3.Need to replace coal midway, large labour intensity;
4.During drying, it generates large plenty of gas such as CO2/SO2/soot, with poor working conditions
5.Soot gas for the oven equipment corrosion is serious, short service life.
6.The temperature is difficult to achieve automatic control; Temperature and humidity in drying process fluctuation is bigger, affect the drying quality.   • High temperature heat pump drying dehumidifying drying room:
1, Drying process completely meet the requirements of food hygiene;
2, Cleaning and hygiene in the good condition, the finished colour and lustre is bright;
3, Automatic control, reduce the labor and the labor intensity;
4, During drying, there is no water/gas/solids generating, the green environmental protection; Good and comfortable working environment .
5, Long service life, low operating cost, good economy;
6, Temperature and humidity is automatic control; Small fluctuations in the temperature and humidity in drying process, the drying quality is stable and reliable.     Our Services A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty    Certifications     If you feel interested in our products ,please feel free to contact me for more information.Thank you!   Contact me!