Bend 1250E Magnetic Sheet Metal Brake Magnabend sheet metal folding machine MANUAL BOX and PAN STRAIGHT BRAKES bending machine

This 1250E Magnetic sheet metal brake Product image is only a representation, actual product appearance may differ slightly
1250E High performance electromagnetic sheet metal folder Specifications. Nominal capacity1250 mm x 1.6 mm 39'' (3-foot) length with a maximum capacity of 16 gauge mild steel.Clamping force (with standard full-length clamp bar)4.5Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.

Recommended for HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops.
Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications.
Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and
more.Eletrical Supply:1 phase, 220/240 V ac and will work at virtually any site.Nominal current:10 Amp Duty cycle:30%Box Depth.Unlimited Bend Angle0-180°Max. Clamping Bar Lift Unlimited Max. Capacity with Extension18ga. (1.21mm) mild steel / 21ga. (0.83mm), stainless steel Max. Capacity without Extension16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel Thermal Cut-Out158°F,( 58998186,70°C)Shipping dimensions 1.17m x 0.38m x 0.32m = 0.12m3 GW/NW110kg/100kgBlade gap adjustment Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.adjustable back gauges Comes with product supports and adjustable back gauges for production runs.Scaled stroke angle controllets you deliver repeatable bends time after time.Notes Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. And thinner, extension On.Easy operation1.Put a piece of material between the clamping bar to the depth required.
2. Engage the powerful magnet in the bending bed with push button control.
3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to
reposition the material.
4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend.open-ended design1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth,since it isn't reliant on conventional finger depths.Standard accessories include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars.Optional accessories available for these models include a narrow clamp bar, a slotted clamp bar for forming shallow boxes more quickly Special tooling Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clamp bars can be replaced by specialised tooling Operator Safety Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)MATERIAL (yield/ult. stress)THICKNESSLIP WIDTH (minimum)BEND RADIUS (typical)Mild Steel (250/320 MPa)1.6 mm30 mm*3.5 mm1.2 mm15 mm2.2 mm1.0 mm10 mm1.5 mm Aluminium Grade 5005 H34 (140.160 MPa)1.6 mm30 mm*1.8 mm1.2 mm15 mm1.2 mm1.0 mm10 mm1.0 mm Stainless Steel Grades 304, 316 (210/600 MPa)1.0 mm30 mm*3.5 mm0.9 mm15 mm3.0 mm0.8 mm10 mm1.8 mm With standard bending-beam extension fitted For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above.1-year parts warranty. Every BEND model have in stock , We can arrange shipping to you ASAP

Advantages:
1. No limitation to depth of boxes.
2. Can form deep channels, and completely closed sections.
3. Automatic clamping and unclamping means faster operation, less fatigue.
4. Accurate and continuous indication of beam angle.
5. Quick and accurate setting of angle stop.
6. Infinite length bending in stages is possible.
7. Open ended design allows folding of complex shapes.
8. Machines can be ganged end-to-end for long bending.
9. Adapts easily to customised tooling (clamp bars of special cross-sections)