1 / 1
Model No. : | TP-BA |
---|---|
Brand Name : | tp |
Product description
Phos-Copper Brazing alloys | ||||||||
DESCRIPTION:Phos-Copper brazing alloys's main materials are copper and phosphorus,it has the characters of easily-flowing, low cost, and perfect welding effect.Needn't to use flux when brazing copper and silver objects, the joints have good strength. | ||||||||
Alloy | Corresponding Alloy | Chemical Composition | Melting Range | Main Features | Typical Application | |||
P% | Sn% | Cu% | Solidus°C | Liquidus°C | ||||
JCuP -1 | 201 BCu92P TC-310D | 7.5 -8.5 | | The balance | 710 | 780 | Close to eutectic crystal composition, low melting point, easy flow, can flow into a small clearance of brazing seam. | Use for copper and copper alloy parts, refrigeration compressor, not suitable for brazing attacking shocking bend parts |
JCuP -2 | BCu93P Bcup-2 | 6.5 -7.5 | | The balance | 710 | 800 | Contain a little phosphorus, has better plastic nature, a little higher melting point. | Use for copper and copper alloy parts, suitable for air conditioning, refrigerator, evaporator, heat exchanger and water heater ect. |
JCuP -3 | 202 | 6.1 -6.8 | | The balance | 710 | 820 | Contain a little phosphorus, good plastic nature, a little higher melting point. | Can make many kinds of brazing ring, wires, brazing copper and copper and copper alloy parts, brazing ample clearance tie-in. |
JCuP -3Sn | BCu88PAg Degussa86 | 6.5 -7.5 | 6.5 - 7.5 | The balance | 640 | 680 | Good spread ability, good caulking ability. | Use for many kinds of copper and copper alloy. |
JCuP -5Sn | BCu86SnP | 4.8 -5.8 | 7.0 - 8.0 | The balance | 620 | 670 | Low melting point, easy flow. | Use for copper or brass parts of water heater, radiant heating, radiant heating ect. |
JCuP
-6Sn | 208 | 5-6 | 5-6 | The balance | 650 | 800 | Low melting point, easy flow. | Use for copper or brass parts of water heater, radiant heating, radiant heating ect. brazing ample clearance tie-in. |
JCuP-7Sn | CP302 | 6.5 -7.5 | 6.5 - 7.5 | The balance | 640 | 680 | Low melting point, easy flow. | Use for copper and copper parts of water heater, water fountain, fuel gas ware, radiant heating and cleaners, polishes ect. |
Aluminum base brazing alloys | |||||||||||
Alloy | Other alloys Standards | Chemical Composition | Melting Range | °C | σ N/mm² | ||||||
Si % | Cu % | Zn % | Mg % | The other | Al % | Solidus °C | Liquidus °C | ||||
BAl88Si | BAlSi-4 | 11.0 -13.0 | / | / | / | / | The rest | 577 | 582 | 582-604 | 147-157 |
BAl67CuSi | 5.5 -6.5 | 27 -29 | / | / | / | 525 | 535 | 535-550 | |||
BAl86SiCu | BAlSi-3 | 9.3 -10.7 | 3.3 -4.7 | / | / | / | 521 | 585 | 571-604 | 245-294 | |
BAl76SiCuZn | BAl-0 | 9.5 -10.5 | 3.5 -4.5 | 9.5 -10.5 | / | / | 515 | 560 | 560-600 | 245-294 | |
BAl88SiMg | BAl-7 | 9.0 -10.5 | / | / | 1.0 -2.0 | / | 559 | 591 | 588-604 | ||
B62 | 3.0 -4.0 | 19 -21 | 24 -26 | / | Mn1.5 | 480 | 500 | 500-550 | |||
Y-1 | BAl-7 | 9.0 -10.5 | 3.0 -4.5 | 5.0 -7.0 | / | 0.1 | 525 | 555 | 570-590 | 225 |
Send your inquiry to this supplier