Specifications automatic shrink sleeving label machine
1. labeling machine for bottles
2. shrinking label machine
3. sleeving label machin
automatic shrink sleeving label machine production: PE Film Shrink Sleeve Labeling Machine Suit Different Bottles Automatic sleeve shrink bottle labeling machine is popular for the bottled water and bottled drink industry because of the low cost of the label material. The labeling process consists of the label dispensing or the roll-fed sleeve label for feeding the label to the bottle mold shaft, to dispense the label by cutting it into pieces under the sensor switch control system, and servo motor control system for shooting label onto the bottles and brush the label into the refined position onto the bottle for water steam shrinking. The labeling units composed of three main parts: the roll-fed label dispensing unit and conveyor system, the steam shrinking tunnel, and the water steam boiler. PE Film Shrink Sleeve Labeling Machine Suit Different Bottles Working procedure of the labeling process: 1) Label setting: Roll-fed sleeve label setting by put the label onto the bottle mold in the central part of the machine, label photo sensor will be receive and give signal for the label feeding for the knife blade label cutting, and for the label shooting process by the label brushing down wheel. 2) Bottle feeding: bottle gearing worm with adjustable width to synchronize the bottle speed to be synchronized with the label part, bottle photo sensor switch will be equipped down the central bottle mold to receive the sleeve label. 3) Label dispensing: label dispensing unit will be mainly to cut the sleeve label and shoot the label onto the bottle accurately under the PLC control system, which is further driven by the servo motor system, label will be cut into pieces and shoot onto the bottle, whereas the silicone brush will be brushing the label into the right space on the bottle. The speed control will be with the synchronizing belt to be connected to each of the servo motor drive. Main mechanical parts for adjusting the width and height of the bottle are user friendly. 4) Label shrinking: Shrinking tunnel is designed with electrical hot air heating tube and the rotary system for the electrical thermal label shrinking, which is with same water steam label shrinking but with better effect. 5) International brand Panasonics PLC and servo motor system is adopted for stable operating.
Input Power | 3.0KW |
Input Voltage | 3phases, 380/220VAC |
Production Efficiency | 200 bottle/min |
Size of Host Machine | 2100L *850W*2000H |
Applicable Diameter of Bottle Body | 28 mm- 125mm |
Applicable Length of Label | 30 mm- 250mm |
Applicable Thickness of Label | 0.03 mm -0.13 mm |
Applicable Internal Diameter of Paper Tube | 5 -10 adjust it at will |
cooperation brand: