Automatic Made In China Rubber Sheet Cooling Line / Tire Tread Cooling Line / Batch off Line

Specifications 8 Roll Cooling Line

1. cooler used to cool rubber sheets

2. cooler with good quality and high technology

 Rubber Sheet Cooling Line / Tire Tread Cooling Line / Batch off Line      Mixer of the machine, rubber extruder supporting the use of the tablet press or rubber sheeting machine. Mixer refining good mastication, the mother of refining, the final mixing of the hard rubber, rubber extrusion.   Tablet press or rubber tablet press tablet, film coming into the soak, dry cooling, and then a continuous swing piece, laminated.  

Parameters/ Version	XPG-600-700	XPG-800-900
Film specification	(4-12)x600-700mm	(4-12)x800-900 mm
Front take-way coneyor belt max linear velocity	400m / min	400m/min
Rubber strip hanging barwoving speed	0.117-2.2 m/min	400m/ min
Axial Fan	0.37kw 5760 m³/ h	0.37kw 5760 m³ / h
Swing range and frequency	1.3m 10-16times/ min	1.3m 10-16 times/ min
Rubber strip temperature after cooling	No higher than 5 above room temperature	No higher than 5 above room temperature
Speed-adjusting frequency motor of  lifting swing device	XWD 1.5-3-1/11	XWD7.5-7-1/43
Speed-adjusting frequency motor or rubber swing edvice	XWD 1.1-5-1/87	XWD 1.1-5-1/87
Rubber bar pitch	160 or 101.6	160 or 101.6
Max hanging height of rubber strip	1400mm	1400mm

    [Part of]   The Cooling unit is a splicing device isolation sink to mention the disc device, stacked devices composed of air-cooled drying devices, finding device or piece of swing   [Film cooler features]   1. Access device for steel roller conveyor with adjustable speed printing devices and longitudinal cutting devices, access devices and lifting devices share a single AC variable speed motor, its transportation. 2. Hanging rod drives in two forms; a stretched out by both sides of the cylinder piston rod to promote the hanging rod, cylinder piston retracts while maintaining the hanging rod does not move through one-way bearing, in order to achieve the intermittent movement of the hanging rod. Another by an AC variable speed motor drive, and the hanging rod speed access and lifting equipment to keep pace. 3. The soaked film coated with release agent, spread evenly, do not pollute the environment, the cooling effect than the spray. 4. Hanging plastic zone is fully enclosed, with motor oblique blowing film, to improve the gas flow direction, to increase the cooling effect. 5 Robot grasping plastic device belonging to the domestic advanced level, grasping the plastic automatic control. 6. Electrical control using a programmable logic controller, a high level of automation, high reliability.   Certificate :