Auto Preparation Room

Auto Prep-Station Specification ANSS 580

Outside size(L*W*H)mm 8100*4000*3450
Inside size(L*W*H)mm 6880*3880*2750
Main door(W*H)mm 3000*2700
Personal door(W*H)mm 600*1750
Total power(KW) 8.9

Wall panel: 58mm EPS insulated material panel, coated steel cover, thickness: 60mm, front door is PVC soft curtain
Basement: Galvanized steel plate, assembled by painted square pipe(40*80), 3 rows of painted grating, 2 rows of antiskid plate
Ramp: Anti-skid board
Air-intake: 1*YDW 4.0kw centrifugal fan, capacity: 13000m3/h, air-exhuast: 1*YDW 4.0kw centrifugal fan, capacity: 13000m3/h, low noise, bigcapacity, energy-saving.
Work area can be set on left, right, or rear for option.
Full air speed: 0.2~0.3m/s; Air exchange rate: 140times/h; Noise: Not more than 80dB(a)
Upper light: 24PCS*36W light tube in the ceiling, side light(for option): 16PCS*36W light tube with ballast. Illumination not less than 800Lux
Two filter layer structures: Crude filter: Domestic high quality nonwoven cotton, can catch the dust larger than 10μ M, fixed on the vent door of work area, easy to replace. Refined filter: BAOCHI600G high quality filter made by customization, multi-layers, dust capacity: Not less than 420G/M^2, fixed on the bottom of plenum, supported by coated top net, beautiful and easy to replace. The whole filter system has a big dust capacity, low windage, long-use, the filter rate is more than 98%, TSP not more than 1.4mg/m^3.
The main parts are brand at home or abroad, stable, reliable, convenient and accurate system, multi-protection circuit, can automatically display all the work process and the fault condition.
Power switch, lighting switch, sanding/spraying switch, urgency stop. You can finish the complete work in one setting