API SPEC 5L Steel pipe

API SPEC 5L Steel pipe

API 5L,  API 5L PSL1 X42, API 5L PSL1 X46, API 5L PSL1 X52, API 5L PSL1 X56, API 5L PSL1 X60, API 5L PSL2 Grade B, API 5L PSL2 X42, API 5L PSL2 X46, API 5L PSL2 X52, API 5L PSL2 X56, api spec, API SPEC 5L, line pipe, Steel pipe, steel pipes

API SPEC 5L is a international standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.

Size range (mm):

Yosin Steel can supply superior Quality High strength, High Toughness, Homogeneous material and Corrosion Resistant Line Pipes for various special service such as offshore and sour services.

UOE:

available from 16in. up to 64in. OD (world`s largest)
UOE line pipe can be supplied as high strength line pipe up to Grade X80, and high toughness line pipe for low-temperature services and corrosive gas or crude oil service.

HFW:

available up to 26in. OD, with wall thickness up to 1in. (world`s largest)
HFW line pipe can be supplied as high strength API grade line pipe up to 5L X80, and high grade line pipe for sour gas service and offshore service.

SMLS:

available up to 16-3/4in. OD
SMLS line pipe can be supplied with corrosion resistant alloy pipe (weldable12% Cr Line Pipe) and high strength API grade line pipe up to 5L X80 for crude oil, gas, water and slurry service.

Application: gas, water and oil transportation in both oil and natural gas .

Packing: Bare/bundles/crates/crate protection at the both sides of tubes or as per customers` requirements .

Chemical Compositions(%) of API 5L PSL1

Grade	C	Mn	P	S	Si	V	Nb	Ti
B	0.28	1.20	0.030	0.030	-	-	-	-
X42	0.28	1.30	0.030	0.030	-	-	-	-
X46	0.28	1.40	0.030	0.030	-	-	-	-
X52	0.28	1.40	0.030	0.030	-	-	-	-
X56	0.28	1.40	0.030	0.030	-	-	-	-
X60	0.28	1.40	0.030	0.030	-	-	-	-

Mechanical Properties of API 5L PSL1

Grade	Yield Strength (Mpa)	Tensile Strength (Mpa)
B	245	415
X42	290	415
X46	320	435
X52	360	460
X56	390	490
X60	415	520

Chemical Compositions(%) of API 5L PSL2

Grade	C	Mn	P	S	Si	V	Nb	Ti	CEpcm
B	0.24	1.20	0.025	0.015	0.40	c	c	0.04	0.25
X42	0.24	1.20	0.025	0.015	0.40	0.06	0.05	0.04	0.25
X46	0.24	1.40	0.025	0.015	0.40	0.07	0.05	0.04	0.25
X52	0.24	1.40	0.025	0.015	0.45	0.10	0.05	0.04	0.25
X56	0.24	1.40	0.025	0.015	0.45	0.10	0.05	0.04	0.25

Mechanical Properties of API 5L PSL2

Grade	Yield Strength (Mpa)	Tensile Strength (Mpa)
B	245-450	415-760
X42	290-495	415-760
X46	320-525	435-760
X52	360-530	460-760
X56	390-545	490-760

Note: c: The sum of the columbium [niobium], and vanadium contents shall not exceed 0.06% except that, by agreement between the purchaser and the manufacturer, an alternative maximum may be established.