APC Pure Sine Wave Inverter , power inverter

APC Pure Sine Wave Inverter, Charger

APC pure sine wave inverter is the latest model presented by Zhejiang Yiyuan Electric Co.,Ltd.. Developed on the base of our previous PSW 7 series, the APC charger has achieved significant improvements on battery charging, AC transfer, etc. By adopting DIP (dual in-line package) switch, the APC pure sine wave inverter provides more smart options for users to customize the performance of the device.

Features of APC Pure Sine Wave Inverter, Charger
1. High overload ability of our APC charger is up to 300% rated power(20 sec.).
2. APC pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).
3. Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
4. It has 15s delay before transfer when AC resumes, and overload protection when our APC pure sine wave inverter equips with generator.
5. 10ms typical transfer time between battery and AC, which guarantees power continuity of APC charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
6. Our APC charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.
7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
8. LCD status display, battery/AC priority switch, USB communication port are available for our APC pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
Note:*For 1KW one. **For some models.

Technical Parameters of APC Pure Sine Wave Inverter, Charger

Electrical Specvifications
	Model	APC 1000W	APC 1500W	APC 2000W	APC 3000W	APC 4000W	APC 5000W	APC 6000W
Inverter Output	Continuous Output Power	1000W	1500W	2000W	3000W	4000W	5000W	6000W
Surge Rating(20s)	3000W	4500W	6000W	9000W	12000W	15000W	18000W
Capable of Starting Electric Motor	1HP	1.5HP	2HP	3HP	4HP	5HP	6HP
Output Waveform	Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency	>88%(Peak)
Line Mode Efficiency	>95%
Power Factor	0.9-1.0
Nominal Output Voltage rms	100-110-120Vac / 220-230-240Vac
Output Voltage Regulation	±10% RMS
Output Frequency	50/60Hz ± 0.3Hz
Short Circuit Protection	Yes, Current Limit Function (Fault after 1sec)
Typical transfer Time	10ms(Max)
THD	< 10%
DC Input	Nominal Input Voltage	12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage	10.0Vdc
Low Battery Alarm	10.5Vdc / 11.0Vdc
Low Battery Trip	10.0Vdc / 10.5Vdc
High Voltage Alarm & Fault	16.0Vdc
High DC Input Recovery	15.5Vdc
Low Battery voltage recover	13.0Vdc
Idle Consumption-Search Mode	< 25 W when Power Saver On
Charge	InputVoltage Range	Wide: 90~135VAC / 164~243VAC; Narraw: 100~135VAC / 194~243VAC;
Output Voltage	Depends on battery type
Charger Breaker Rating	10A	10A	10A	20A	20A	30A	30A
Max Charge Rate	35A / 70-90A Max (Charger Current Control)
Over Charge Protection Shutdown	15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current) 4 step digital controlled progressive charge	Batterytypes ( *2 for 24Vdc, *4 for 48Vdc)
Batterytype	Fast Vdc	Float Vdc
Gel U.S.A	14.0	13.7
A.G.M 1	14.1	13.4
A.G.M 2	14.6	13.7
Sealed Lead Acid	14.4	13.6
Gel Euro	14.4	13.8
Open Lead Acid	14.8	13.3
Calcium	15.1	13.6
De-sulphation	15.5 for 4hrs
Remote Control	Yes. Optional
Bypass & Protection	Input Voltage Waveform	Sine wave (Grid or Generator)
Nominal Voltage	120Vac	230Vac
Low Voltage Trip	80V/90V±4%	184V/154V±4%
Low Voltage re engage	90V/100V±4%	194V/164V±4%
High Voltage Trip	140V±4%	253V±4%
High Voltage re engage	135V±4%	243V±4%
Max Input AC Voltage	150VAC	270VAC
Nominal Input Frequency	50Hz or 60Hz (Auto detect)
Low Freq Trip	47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Low Freq re engage	48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
High Freq Trip	55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
High Freq re engage	54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Output Short circuit protection	Circuit breaker
Bypass breaker rating	10A	15A	20A	30A	30A	40A	40A
Transfer switch rating	30amp for UL & TUV	40amp for UL
Max bypass current	30amp	40amp
Mechanical Specification	Mounting	Wall mount
Inverter Dimensions(L*W*H)	382*218*179mm	442*218*179mm	598*218*179mm
Inverter Weight	16KG	17KG	20KG	24KG	35KG	45KG	45KG
Shipping Dimensions(L*W*H)	520*315*300mm	580*315*300mm	740*315*300mm
Shipping Weight	18KG	19KG	22KG	26KG	37KG	47KG	47KG
Display	Status LEDs / Status LEDs+LCD
Standard Warranty	1 Year