2. ALLOY COMPOSITION: PRODUCT | ALLOY | TEMPER | CHEMICAL ANALYSIS(%) | MECHANICAL PROPERTIES | STANDADR | Fe | Si | Cu | Mn | Mg | Zn | Zr | Ni | Cr | Ti | Al | TENSILE STRENGTH (MPA) | ELONGATION(%) | ALUMINUM STRIP | 1050 | O | 0.40 | 0.25 | 0.05 | 0.05 | 0.05 | 0.07 | / | / | / | 0.05 | REMAINED | ≤40 | ≥32 | GB/T3880-2006 | PRODUCT | ALLOY | TEMPER | CHEMICAL ANALYSIS(%) | MECHANICAL PROPERTIES | STANDADR | Fe | Si | Cu | Mn | Mg | Zn | Zr | Ni | Cr | Ti | Al | TENSILE STRENGTH(MPA) | ELONGATION(%) | ALUMINUM STRIP | 1060 | O | 0.35 | 0.25 | 0.05 | 0.03 | 0.03 | 0.05 | / | / | / | 0.03 | REMAINED | ≤40 | ≥32 | GB/T3880-2006 | PRODUCT | ALLOY | TEMPER | CHEMICAL ANALYSIS(%) | MECHANICAL PROPERTIES | STANDADR | Fe | Si | Cu | Mn | Mg | Zn | Zr | Ni | Cr | Ti | Al | TENSILE STRENGTH (MPA) | ELONGATION(%) | ALUMINUM STRIP | 1070 | O | 0.25 | 0.20 | 0.03 | 0.03 | 0.03 | 0.07 | / | / | / | 0.03 | REMAINED | ≤40 | ≥32 | GB/T3880-2006 | PRODUCT | ALLOY | TEMPER | CHEMICAL ANALYSIS(%) | MECHANICAL PROPERTIES | STANDADR | Fe | Si | Cu | Mn | Mg | Zn | Zr | Ni | Cr | Ti | Al | TENSILE STRENGTH (MPA) | ELONGATION(%) | ALUMINUM STRIP | 1060 | O | 0.35 | 0.25 | 0.05 | 0.03 | 0.03 | 0.05 | / | / | / | 0.03 | REMAINED | ≤40 | ≥32 | GB/T3880-2006 | 3. MECHANICAL PROPERTIES: Conductivity | 62%-70%IACS at 20℃ | Electrical Resistivity | ρ(20℃) ≤ 0.02825 Ω•mm²/m | THICKNESS (MM) | TENSILE STRENGTH (Mpa) | BRINELL HARDNESS | ELONGATION (%) | ≤2 | ≤40 | ≤23 | ≥32 | >2 | ≤40 | ≤23 | ≥32 | 4. THE STANDARD OF THE PRODUCTION 4.1 THE RANGE OF THICKNESS TOLERANCE: THE RANGE OF THICKNESS(mm) | THICKNESS TOLERANCE(mm) | 0.20-0.40 | ± 0.015 | 0.40-1.00 | ± 0.020 | 1.00-2.00 | ± 0.040 | >2.0 | ± 0.060 | 4.2 THE REQUIREMENTS ABOUT THE INNER DIAMETER AND OUTER DIAMETER: ID(mm) | OD (mm) | 302 | 800-900 | 400 | 850-950 | 505 | 900-1200 | 4.3 THE VALUE OF BURRS: | THE VALUE OF BURRS (mm) | THE GENERAL PROCESS OF PRODUCTION | 0.2-0.02 | HIGH PRECISION PROCESS OF PRODUCTION | 0.006-0.02 | 4.4 THE PRODUCTIONS QUALITY: A: SURFACE QUALITY: The aluminium strip/foil surface must be clean, no waves, no grease, no spots, no crack, no bubbles, no scratch, no inclusion, no oxidation corrosion and other defects. No material separation or flaking is allowed. B: INTERNAL QUALITY: The inside of the aluminium strip/foil is not allowed to have center crack, stratification and holes, the aluminium strip/foil inside is not allowed to have breakage. C: EDGES QUALITY: Material to be free of burrs to eliminate damage to insulation,no burrs, with rounded edges. Packaging & Shipping Aluminum Coils/ Aluminum Stripmain Packing Details | Packaging Details: Standard seaworthy export packing, wooden pallets with plastics protection for the coil and sheet (2)The packing can be eye to sky or eye to wall based on the customer’s requirement (3)The packing is very strong, which has 3 lays, thick fiber, foam, plastic, the bottom wooden pallet; you can see the detail packing information as below. | | | Packing: eye to wall | Eye to sky | | | Surface quality: The surface is clean without any corrosion, oil stains, puckering slits, scratches visible striation, rolled marks, shaken traces or other defects. No shipping spots, rolled marks, abrasive marks or dark lines. | MOQ: 1 MT | Delivery time: 10-25 days after the payment | Appearance quality: It is neat and clean without defects like burrs, raw edges, arrow heads, and mixed layer. | If you are interested in it,pls mail to me, I will send the details to you, If you are urgent, you can call me: +86-18638223805 | FAQ 1. Payment Terms: | 100% irrevocable L/C at sight or 30% T/T in advance as deposit,70% balance against the B/L copy | Packaging: | Wooden pallet suitable for the long distance sea transportation | Delivery: | After received your L/C or 30% T/T as deposit 10-25 days | MOQ: | 1 MT | 2. ABOUT US | Henan Taimei Aluminum Industry Co., Ltd. is a specialized manufacturer and exporter for 1*** 3*** 5*** 6**** 8*** series aluminum sheet, coil, foil and PS base plate. such as hot -rolled thick plate, aluminum circle/disc for cookware, aluminum drilling entry for PCB, aluminum tape for aluminum plastic tube, aluminum base plate for PS plate, aluminum bright finish tread plate, aluminum circles, aluminum checkered plate, PP cap materials and others. These products are generally applied to air-conditioner, washing machine, refrigerator, cosmetic package, printing, building decoration, aluminum ROPP cap, bus floor, and telecommunication cable etc. fields. | 3. CONTACT US Quality Assurance Our Services Taimei can provide you: 1. Taimei is specialized in aluminum product. 2. Taimei would like to offer best service and help you company save costs. 3. All risk of orders is within Taimei account until you company has received products smoothly. 4. Upon receipt of your purchase order, production will be arranged immediately. 5. After-sales service time: Taimei does its best to serve customers the best that Taimei can. Send your inquiry to this supplier Send Inquiry
|