Rated Voltage: 0.6/1KV, 1.8/3kV
Conductor: Al
Insulation: XLPE
Cross Section: Based on client's requirement
Operating Temperature: 90° C
Short Circuit: (Max. 5 seconds) Less than 250° C
Laying Temperature: ≥ 0° C, a heating beforehand is needed if the ambient temp of laying is lower than 0° C
The bend radius for laying: The one of single core cable should not be shorter than 20 times of outer diameter; The one of multi core cable should not be shorter than 15 times of outer diameter.
The laying is not limited by the drop height.