Agitating tank

Specifications the most commonly used agitating tank at present.

Features     This product is the most commonly used ordinary agitating tank at present. Located at the bottom opening of the cycling cylinder, its impeller feeds the ore pulp and chemical reagent into the cycling cylinder with a suction orifice for agitating. The new impeller designed by through experiments is defferent from the original agitating tank I and II, with high agitating efficency.   Notes for Selection    -We can make rubber impeller, and nylon impeller, etc as required by the customer. Please specify the type while placing your order.    -We can arrange the relative positions of the motor, receiving opening and discharging opening as required by the customer. Generally, relevant parts are assembled at the time of on-site installation.    -There are two types of RJ agitating tank: cone base and flat base. Please specify it if a cone base type is demanded.

Technical parameter list of RJ single impeller agitating tank

Standard model	Internal size of trough(mm)		Effective volume	stirrer		motor		dimension(mm)		weight(kg)
	Diameter	Heigh		diameter(mm)	speed(r/min)	model	power(kw)	length	heitht
XB05	500	500	0.078	150	690	Y80M2-4	0.75	720	874	110
XB07	750	750	0.26	240	530	Y90L-4	1.5	939	1241	228
XB10	1000	1000	0.58	240	530	Y90L-4	1.5	1080	1665	350
XB12	1200	1200	1.14	400	320	Y132S-6	3	1540	1858	765
XB15	1500	1500	2.2	400	320	Y132S-6	3	1690	2171	1360
XB20	2000	2000	5.5	550	230	Y132M2-6	5.5	2381	3046	1655
XB25	2500	2500	11	625	230	Y160M-6	7.5	2881	3546	2766
XB30	3000	3000	19.1	900	210	Y225S-8	18.5	3266	4325	4296