100% Polyolefin Plastics
1. Dip tube PP
2. Dome valve PE
3. Piston PE
4. Body PP
5. Nozzle PP
6. Rigger PP
7. Lower Shroud PP
8. Upper Shroud PP
Output option: 1.2-1.35cc
Usage: Daily use, cleaning, wash
Package: Plastic bag, then to cartons
OpUs Sprayer Range
100% Recyclable Pre-compression Sprayers/ 100%
Characteristics
OnePak™ Pre-compression engine - drip free, no leakage & always
Primed
All plastic polyolefin sprayer 100% recyclable, no metal used
Largest variety of screw and snap-on closures
Variable output
Certified child-safe for Europe & USA
Easily customizable exclusive upper shroud designs, labels, caps
& colors
Spray Patterns
Spray-off, narrow angl
Round misty spray, 40°
Spray-off, wide angle
Round misty spray, 65°
Spray-off / Stream
Round misty spray / Straight jet
Stream
Foam Patterns/
Foam-off, non-vented
Wet foam
Foam-off, with vented insert /
Airy foam
Foam-off, with vented mesh
Creamy foam
Closures Snap-on and child-safe certified snap-on, Screw-cap
28/400, 28/410, 28/DIN, 28/410 Ratchet (child-safe certified)
Output 1.15 or 1.35 cc per stroke
Dip Tube Straight or curved, "V-cut"
Passive venting Continous release of gases without
Activating the trigger
Labels Unique communication opportunity with tamper
Evidence possibilities
Upside down spraying Non-leaking & fast venting, no
Loss of prime, 360°
Home & Garden For larger container volumes with
Extended diptube
Customizable upper shroud designs
Trigger Standard 2 finger, Long 3 finger
Colors
Opaque
Transluscent
Customizable
OnePak™ Pre-Compression Technology
OnePak™ Pre-Compression
Compression is created when the piston is pushed
Into the sprayer.
The liquid will seek the path of least resistance
And attempt to leave the sprayer.
The check valve is bias-closed, stopping the flow of
Liquid back into the dip tube.
When liquid pressure reaches 3 bars / 43.5 psi, the
Priming dome valve "pops" open.
This sudden release of the dome causes the liquid
To be dispensed at high velocity creating very
Effec- tive and consistent spray and foam patterns.
Note
Unlike conventional sprayers, the pre-compression valving of the OpUs and OpAd causes the entire volume of the
Product output to be discharge at one time when the trigger is fully actuated. This functionality virtual y eliminates
Liquid "fall-off" or "boulders" (large droplets of liquid) from the start of actuation and the release of the trigger
(Reference the Histogram example below).
Pre-Compression Benefits
Highly-efficient and comfortable spray action
Powerful drip-free dispensing
Superior spray & foam patterns
Consistent droplet size
No leakage when nozzle is open
Once primed, always ready for use
Quick efficient valve function, low strokes to prime