A6 series 1 gang switch and 2gang 2 pin socket

1) If there are no special requirements, in the same suite, the switch shall be 1200 ~ 1500mm above the ground, 150 ~ 200mm away from the door, adjacent to the socket in the same row, and shall be installed on the same horizontal line without being blocked by sliding doors, furniture, etc.

(2) The position of the entrance switch shall be selected according to the user's habits.

(3) The switches of kitchen and toilet should be installed on the wall at the door opening side. The mirror front lamp and Yuba should be equipped with waterproof switch and set in the toilet.

(4) In order to live comfortably and conveniently, the living room and bedroom shall adopt double control switches. One double control switch in the bedroom is installed on the wall of the entrance, and the other double control switch is installed on the upper side of the bedside table or at the easy operation part beside the bed. A double control switch can be installed on both sides of the larger living room.

(5) The kitchen is equipped with a power socket with a switch to control the power on and off in time.

(6) The dresser shall be equipped with a switch.

(7) The balcony switch shall be set at the indoor side and shall not be installed in the balcony.

(8) Generally, the switch of the restaurant should be on the inside of the door.

(9) The single head or ceiling lamp in the living room can use a single switch. For multi head chandelier, a light sub controller can be installed on the chandelier to adjust the brightness as needed.

(10) If the light of the study lamp is a multi head lamp, a sub controller shall be added, and the switch can be installed inside the study door.

(11) The installation position of the switch shall be convenient for operation, and shall not be placed in a narrow place with equal distance behind the door.