1 / 5
Origin : | Mo(Origin) |
---|
Product description
Common problems of Bostik non marking installation:
1. Blue butyl rubber should be purchased separately (accessories do not include blue butyl rubber). If necessary, please add the purchase order to pay together.
2. Blue glue is also called Blu tack because it is light blue.
Parents asked: where is the production of blue butyl rubber?
Waiter: imported from France, the real name of blue butyl rubber is Blu tack, a subordinate brand of Bostik, and Bosch is a subordinate brand of total
Relatives asked: what kind of wall can use (Bostik) blue butyl glue?
Small two answer: General metope can use blue Ding glue, for example latex paint metope, ceramic tile metope, wallpaper metope, glass metope, marble metope all can!
Relatives asked: what kind of wall can not use (Bostik) blue butyl glue?
Small two answer: that kind of old-fashioned whitewash wall, touch with the hand straight dregs, drop white powder of the wall certainly can't use, there are stains, oil stains, dust on the wall also can't stick Oh!
Parents asked: how to test whether the wall meets the installation requirements of blue butyl rubber?
The second answer: before use, take out a small piece of blue glue and stick it to the wall, and test whether the paint and skin will fall off on your wall. If the paint and skin fall off, it means that your wall is not suitable for the installation of blue butyl rubber, otherwise, the picture frame will fall off. Otherwise, it is suitable for the installation of blue glue.
Relatives asked: if my wall can not use blue butyl rubber, this with nails and other accessories
Small 2 A: this model default send a complete set of accessories, you can also use nails to install, or large frame with nails, small frame with blue butyl rubber.
Parents asked: how to use the blue butyl rubber installation drawings, installation is not very troublesome?
Waiter: bluebutyl rubber can be installed with drawings. It is very simple to install (use a knife to cut out the photo frame on the drawing, and then install it). You can also do DIY installation without referring to the drawings to create a more creative and only your own shape.
Parents asked: blue glue is very hard, how to stick in winter?
Small two answer: when the temperature is low in winter, it is recommended to put the cut adhesive tape (without removing the paper on both sides) into the microwave oven and heat it for 1 minute. After that, take out the paper on both sides and rub it again and again for a short time. After the blue butyl rubber is fully softened, the pasting effect is better.
Parents asked: a set of photo wall need to buy a few bags of blue butyl rubber?
Waiter a: about 10 frames can be glued to a pack of blue butyl rubber. Please decide the number of bags to buy according to the number of wall frames in each set of photos.
Relatives asked: how to remove the blue butyl rubber after installation?
Waiter: use an art knife to cut the glue along the paste gap, take off the photo frame, and slowly remove the residual glue from the edge.
Parents asked: how long is the shelf life of blue glue?
Sophomore: the warranty is 5 years after opening.
Parents asked: how much is the content of a bag of blue glue?
Waiter: each bag weighs 75 grams, including 4 pieces. Each piece can be cut into many small pieces and kneaded into a ball
Send your inquiry to this supplier