750 65R25 Radial OTR tire for Machine

Specifications 750 65R25 Radial OTR tire for Machine

1. Radial Off-the-Road(OTR) Tire 750/65R25 B02S

2. Load Index & Speed Grade: 202A2/190B

750 65R25 Radial OTR tire for Machine Pattern Description:   1.With wide and stable tread.
2.Excellent traction and adhesion.
3.Designed to deliver exceptional operator comfort and for articulated trucks.   Specification:

Tire Size	Star Rating	Load Index & Speed Symbol	TRA Code	Tread Depth (mm)	Tube Type	Standard Rim         (Rim Width & Flange)
600/65R25	2 star	187A2/178B	L-3/E-3	35.5	Tubeless	19.50-2.5
650/65R25	2 star	193A2/180B	L-3/E-3	38.5	Tubeless	19.50-2.5
750/65R25	2 star	202A2/190B	L-3/E-3	44.5	Tubeless	24.00-3.0
850/65R25	2 star	196B/207A2	L-3/E-3	48.5	Tubeless	25.00-3.5
875/65R29	2 star	214A2/203B	L-3/E-3	52.5	Tubeless	27.00-3.0

Off-The-Road Tire Information   1.     Tire Structure   2. Definitions. 1.1   Tire Size The size of each tire is indicated by nominal width and rim diameter in inches and mm. Radial Structure is indicated by the letter “R”. For some tire the aspect ratio is indicated by percentage. Example Radial Tire: 23.5R25 , 18.00R33 Bias Tire:  23.5-25, 18.00-33   1.2   Star Rating, Ply Rating and Load Index. The load capacity of a tire is indicated by the star rating( in case of radial tire) and the ply rating (in case of bias tire). The load index is applied in countries where the ETRTO standards are used. 1.3   Overall Diameter (OD) “Overall Diameter” is twice the section height of a new tire, plus the nominal rim diameter, including 24-hour inflation growth. 1.4   Overall Width (OW) “Overall width” is the width of a new tire, including 24-hour inflation growth, and including protective side ribs, bars or decorations. 1.5   Section Width (SW) “Section Width” is the width of a new tire, including 24-hour inflation growth and including normal sidewalls, but nor including protective side ribs, bars, or decorations. 1.6   Static Loaded Radius and Width (SLR, SLW) “Static Loaded Radius” is the shortest distance from the axle center to the contact surface of a tire and “Static Loaded Width” is the overall width of a tire, mounted on the approved rim at the specified inflation pressure and placed still and vertically on a flat board, and loaded with the specified load. 1.7   Original Tread Depth (OTD) “Original Tread Depth” is the tread depth of a new tire measured at the point of tread-indicator where available or one-fourth the width of the tire crown section from the crown center, including 24-hour inflation growth.     3. T.R.A. Classification and application.

Service	Vehicles	T.R.A. CODE
Loader and Dozer	Shovels Loaders Bulldozers	L-2
		L-3
		L-4
		L-5
		L-5S
Earthmover	Dump Trucks Coal haulers Scrapers	E-3
		E-4
		E-7
Grader	Graders	G-2
		G-3
Compactor	Tire-rollers	C-1
		C-2
Industrial	Mechinical handling Equipments	IND3
		IND4
		IND5

4. The different OTR tire familes   100 Series ( Narrow Base )
The H/S aspect ratio is approximately equal to 1.00
The section width, given in inches is a whole number
Example: 18.00R25 80 Series ( Wide Base )
The H/S aspect ratio is approximately equal to 0.80
The section width, given in inches is a whole number followed by a fraction
Example: 20.5R25= 525/80R25 65 Series (Low Profile Tires )
The H/S aspect ratio is appoximately equal to 0.65
The section width, given in millimeters followed by the number 65
Examplt: 750/65R25 
5. Fitting Guide  PLEASE CONSULT. Pictures   Patterns:  Tires' Sidewall Details: Tires in Stock: Loading: Tires' Work Conditions:  If need more information about these tires, please contact us.