600H Arch Rubber Fender Protect Shipboard , PIANC Rubber Do

600H Arch Rubber Fender Protect Shipboard , PIANC Rubber Dock Fenders

Quick Detail:

1. PIANC standard approved;

2. High durability, simple structure ;

3. UHMW PE pads covered;

4. Wear resistant;

5. Low friction coefficient.

Description:

With the merits of high absorption energy,super arch rubber fenders are widely utilized, which can be laid with less restriction,and the dimensions of which are suitable to most installation conditions.The energy absorption per unit weight of which is only below that of the super cell rubber fenders, which is 3.5 times higher than that of the cylindrical type fenders, and 2.3 times higher than thar of D type rubber fenders.Therefore,the super arch rubber fenders can be manufactured with less amount of raw material.

Applications:

The working surface of the 4th generation super arch fender is adhered with the PE resin boards directly,of which the service life is prolonged dramatically.The fender can be widely utilized on the wharves of both gravity and piled foundation with a DWT below 30,000 (50,000), shipyards, docks and shipborne fender system.So it is welcomed by clients,and become the mainstream of designer's selection.

Specifications:

Compounds	Superhigh Reaction force(P2)				High Reaction force(P1)				Standard reaction force(P0)				Low reaction force(P01)
Deflection	52.5%		55%		52.5%		55%		52.5%		55%		52.5%		55%
Performance Length(mm)	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M
1000L	644	164	886	176	496	126	690	136	412	104	570	112	351	89	490	96
1500L	966	246	1329	264	744	189	1035	204	618	156	855	168	526	133	735	144
2000L	1288	328	1772	352	992	252	1380	272	824	208	1140	224	702	178	980	192
2500L	1610	410	2215	440	1240	315	1725	340	1030	260	1425	280	877	222	1225	240
3000L	1932	492	2658	528	1488	378	2070	408	1236	312	1710	336	1053	267	1470	288
3500L	2254	574	3101	616	1736	441	2415	476	1442	364	1995	392	1228	311	1715	336

Note Rated deflection 52.5%

Maximum deflection 55%

Performance tolerance:±10%

Competitive Advantage:

• Simple installation
• Wide ranges of sizes and lengths
• PIANC tested and certificated
• Low-friction faced design
• Tough and reliable design

1. The friction factor is less than 0.2,which can reduced the torsion at the bottom of the fender dramatically,and can prolong the service life of the rubber fender.

2. The PE resin board can be restored easily.

3. The PE resin board can be restored as various colors,i.e.blue, gray and nacarat etc., which can make the product with a beautiful outlook and obvious visibility,so it is very suitable to the marinas and other scene attracting quays..