500L Capacity Seperated Pressurized Water Tank For Solar System

Seperated Pressurized Water Tank

Features:
1. It adopts the Automatic argon welding solitary, and the lifespan is especially long.
2. For the all closed separated tank, the rated pressure is 0.6Mpa.
3. It adopts the super thick insulation layer, because it can keep warm and save electric energy.
4. Temperature and pressure relief valves relieve high temperatures and pressures.
5. There is the anode magnesium rod inside the tank to extend the lifespan.
6. The separated tank is especially suitable for water use of houses, hospitals, schools and the hotels.
Solar water storage tank key technical data

1. Outer tank: colored steel.
2. Inner tank: 304-2B stainless steel, 316 stainless steel.
3. Insulation Layer: high density,one-off molding polyurethane foam, density: 40Kg/m3
3. Heat exchanger(inside tank): stainless coil
4. Max. pressure: 1.2Mpa, Working pressure: 0.6Mpa

Drawing for Pressurized Water Tank



Production line

Packing
1,Carton box

2,.Carton box with wooden palate





 

Jinyi solar water heater tank advantages

1. Extremely low heat loss: all Jinyi solar water heater tank are very well PU foam insulated, compared to traditional mineral wool is about 40 % better, for a normal household this equals a saving of approximately 450 kWh per year. Under one-off modling/high pressure foam technology, with 50-60mm thickness, 42Kg/m3 density, the heat loss is extremely low.

2. Anti-corrosive protection: Use super big size magnesium anode for additional anti-corrosive protection, long service life.

3. High heat exchange efficiency: Large heat exchanger surfaces make tanks ideal for solar water heating system.

4. Smooth coil pipe surface for excellent heat conduction.

5. Inspection flange easily used for inspection and cleaning the inside of tank for maintenance purposes, guarantee the water quality.

6. Available with one or two heat exchangers, suitable for every application.

7. Adopt special Incoloy 800 electric heater, which have super anti-corrosion, dry-heat resistant, super heat conduction, etc feature.

8. Inner tank and internal heat-exchanger coils made of same material-stainless steel, can welded together, avoid potential leakage problem.

9. Each inner tank is individually tested for high pressure up to 10Bar/1.0MPa pressure.

 

.