4X4 Military Truck Mounted Crane 3ton Knuckle Crane Truck

Model NO.: CLW5161JSQT3


Condition: New


Maximum Lifting Weight: 2-4t


Crane Jib: Two-Arm


Max Lifting Moment: 6.72 T.M


Min Lifting Weight: 750ton


Cargo Dimension: 4.2mm


Trademark: clw


Specification: 3.2Ton


HS Code: 8704223000




Certification: ISO9001


Maximum Lifting Height: <10m


Shaft Number: 2


Type: Folding


Crane Weight: 1150kg


Truck Weight: 4300kg


Turning Angle: 370degree


Transport Package: Nude by Wax Spraying


Origin: Cn


A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own. Many older operators favor the two-engine system due to leaking seals in the turntable of aging newer design cranes.



1,Crane capacity from 2Ton to 25Ton , include boom crane and Jib crane ,crane can be located at rear of cabin or rear of cargo according to customer requiremetns.

We also can sell crane only to install it on customer's chassis ,we can provide you drawing and other necessary information for installation .

crane brand like CLW , XCMG , SANY-PALFINGER, SHIMEI, UNIC,etc . 

 

2,Chassis can be choose others like FAW , ISUZU , SINOTRUCK, FOTON , JAC , JMC ,SHACMEN ,NORTH BENZ , ETC ,

 

3, cargo dimension is according to customer requirements and chassis .

 

3, Warranty period is 8000KM or 12 month which comes first .

 

4,so if you have such requirements ,please contact me with TM:truck2011 or cell phone 86-13872885121 .



specification of 4x4 military truck mounted crane 3Ton knuckle crane truck

Vehicle	model	CLW5161JSQT3
	Overall dimension(mm)	9000,8500×2490×3600,3720
	GVW(Kg)	15800
	Curb weight(Kg)	8105,8755
	Max speed(km/h)	80
Chassis	Chassis model	EQ5160GKJ1
	Approach/departure angle	32/15,32/18
	Front/rear overhang(mm)	1250/2650,1250/2550
	Engine model	B190 33
	Engine manufacture	cummins
	Displacement(ML)	5900
	Power(KW)	140
	Cargo dimension(mm)	5300×2294×1200
	Fuel	Diesel
	Wheel no	2
	Wheel base	4700
	Tyre No	6
	Tyre model	9.00-20
	suspension	9/10+8
	Axle	Front		3.6Ton
		Rear		9Ton
	Gearbox	8JS85E
	Frame	300mm
Cabin	Dongfeng 153 Cabin ,G type
Standard	2 front outtriger ,operation arm is at left side of truck
Crane	Model		SQ3.2ZK2Q
	Max lifting capacity(kg)		3200
	Max monmnent(T.M)		20
	Rotation angle		370 degree
Option	High operation seat , 2 rear outtriger

Photo of 4x4 military truck mounted crane 3Ton knuckle crane truck











certificate of factory :



 

FAQ:



Q1. Quality control

A:We make quality control for each step while producing and before shipping.



Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.


   LC terms is also can be accepted .



Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.DAP etc .



Q4. How about your delivery time?

A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.


For standard products, delivery time is as below:

Water tanker truck:7 days

Fuel tanker trailer:15-20days

Garbage truck:15 days

Sweeper road truck:25 days

Wecker truck:7-10 days

Suction sewage/Fecal truck:7-15 days

Crane truck:15 days

Refrigerator/Van truck:7-15 days

Dump truck:20 days

Concrete mixer truck:7-25 days

LPG :20-30 days

LED truck:7-15 days

(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)





Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.



Q6. How to control truck quality?

A: we have Rich experience workers and engineer to control quality before and on production , we strictly followed STATE special truck technical specification and safety production specification .


We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.



Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery



Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.


 


Q9. Did you sell truck to our country before?


A:Our main market is Africa, Asia, South America , Oceania ,middle east , annual sales is around 5000units and keeping growing every year .