4 Digits Sensor Indicator Temperature Sensor Indicator

  4 Digits LED Sensor Meter Speed Sensor/Weighing Sensor Meter       SD8 Sensor Indicator Feartures: 1) Optional analog signal v/mA input or temperature sensor signal input.
2) Display range can be set arbitrarily for analog signal measuring.
3) Panel with zero operation function
4) Mature technology,strong anti-interference
5) 2 loops free-setting alarm output function.           SD8 Sensor Indicator Model:

Model	Input type	Alarm	Auxiliaty power
SD8-A10-T	TC/RTD universal input (Ω,0~50mV to be ordered)	0	No
SD8-RC10B-T		2	DC24V(12V to be ordered)
SD8-A10	0~10V 0~5V 1~5V 4~20mA 0~20mA other signal can be ordered	0	No
SD8-RC10B		2	DC24V(12V to be ordered)

        SD8 Sensor Indicator Specification:

Input type	Analog signal:0~10V 4~20mA,Temperature signal:K,J,E,T,PT100,Cu100,Cu50
Display range	-1999~9999
Temperature excursion	≤0.01FS/℃(Typical value 50PPM/℃)
Auxiliaty power	DC 24V±10% Load current≤60mA
Alarm mode	absolute value alarm high/low limit
Output type	Relay output:capacity 3A/250VAC
	SSR output:switch power:24V;Linear power:12V,load 30mA
Alarm output	Relay output:capacity 1A/250VAC
Power supply	48*48 is switch power,100~240VAC;othwe sizes with 220V power supply,110V to ne ordered
Total current	<20mA(220VAC)
Environment	0~50℃ 45~80%RH
Storage environment	-10~60℃ 25~85%RH
ESD	3 level contact discharge±6000V Air discharge±8000V
Pulse train anti-interference	3 level each mode±4000VP-P
Lightning surge	3 level line to line±2000V
Frequency drop	3 level

    Note:Other auxiliary power to be ordered. Note:The default input signal of factory is 0-10V,and you can place the hardware jumper following figure if you need change the voltage input to the current input.(It can jumper connect when you draw out the meter board)              SD8 Temperature Sensor Indicator Connection: