3D carbon fiber purple/Sliver/black/pink vinyl air permeabl sticker air channel carbon fiber

Specifications 1.air channel carbon fiber

2.Abrasion&solvent resistant&water-proof

3.Stylish&protected your car paint

4.Easy to install

3D carbon fiber purple/Sliver/black/pink vinyl air permeabl sticker air channel carbon fiber Physical Data: 

Key Property	Value
Backing	High flexible PVC film
Adhesive	Removable Glue
Outdoor durability	3-5 years
Indoor Durability	5~10years
Elongation	>10%
Abrasion Resistance	≤1000 cycles
Stain Resistance	99%
Temperature resistance	-40°c~140°c

  Advantage:

1.Eco-Friend Material

2.Easy to applied and to be removed

3.Easy to take care of (Can be clean with soap and water)

4.Easily remove without residue and will not harm the painted surface of your vehicle

  Size:

Item	Length	Width	Thickness
Carbon Fiber	30M	1.27/1.52(m)	120miu
Carbon Fiber Air Free	30M	1.27/1.52(m)	120/140/180(miu)

Suggest:24''×48'' will cover most of Laptops                 60''×48'' will usually coverand entire roof of a car . Installation: Measure your car body size and then cut the film in different size for each part . Clean the surface you are going to operate,make it clean and dry . Used a hair dryer or heat gun to shape the film may help to make to surgace smoother Cut the useless film by knife The instllation done  Removal Tips: Carefully make a 20cm(8inch)Cut on film ,and advoid damaging the based. Warm and soften the film with home blow dryer or heat gun on a low setting Peel the film in small strips You may removed the remaining adhesive on the base with an 3M ahesive remover Picture Shows:    »Different colors and different material avaliable:   Application Range: 

1.For Car/Bus/Ship/Airplane/Motrocycle decoration and protected

2.For home appliance wrapping and decoration

3.For stylish your electronic products and others in your life

  Contacted: