3 pin 1 multifunction tester T100QD

Product Description 3 in 1 multifunction tester T100QD                               User Guide     Thank you for choosing our product T100QD. Please read this user guide   carefully before operating , in order to make sure operate it correctly.   Standard package T100QD main body (USB-C input plug) Input Adapter tip (USB-C female to USB-A male) USB-C to USB-C charging cable DC output cable DC output tips x 5pcs Manual  How to Use 1. USB-C plug input: Plug it directly into the USB-C output socket ( for test QC & PD output ) or          indirectly plug into the USB A output socket( for test QC output only ) by the input adapter tip          (accessory ; USB-C female to USB A male of adapter tip) of output of the power supply device      ( power bank, AC adapter, car charger). 2.   Function switch : select “Meter” or “Tester”             When set on the “ Meter ” position, only the USB-C port will output to loading device a.(like mobile) by the attached USB-C to USB-C charging cable. The T100QD as multi-meter. The DC Jack port will be disable, the QC/PD switch & the voltage up/down push button & Dip switch will be invalid at the state .  b.    When set on the “ Tester ” position, the DC jack port will output and USB-C port will be disable, the output voltage is controlled by QC/PD switch & the voltage up/down push button & Dip switch. Please note it only can test from 5V to 12V of QC class A test; over 12V of QC class B test is unavailable .     3.  USB-C output port : apply for the multi meter function ; the operation as below 1) Set the function switch on the "Meter" position 2) Connect the load device (Macbook, smart phone…) to the USB-C output port via the type C to type C charging cable as attached . 3) The voltage and current multi meter will auto display the real-time voltage and current.  4.  QC/PD switch a.When set on the " QC "position, the DC jack will output the QC3.0/2.0 working voltage and current. And display on the voltage & current multi meter at same time .  b. When set on the " PD " position, the DC jack will output the USB3.1 PD working voltage and current. And display on the voltage & current multi meter at same time.  5. DC Jack output (for output QC or PD working voltage ): 1)  Set the function switch on the " Tester " position. 2)  Set the QC/PD switch on the " QC " or " PD " position 3)  Connect the load device (Macbook, laptop, smart phone…) to DC jack port via the proper DC plug & output cable. 4) Press the voltage up/down push button(see the item 6,7 description of the voltage up/down push button about setting the voltage by hand) to adjust the output voltage working on the QC3.0/2.0 or USB3.1 PD state ; or setting Dip switch for fixed output voltage(see the item 9 description of the Dip switch about setting the voltage by hand)   5) The voltage and current meter will auto display voltage & current volumes of the QC or PD function for the real machine load device. 6.   Voltage up push button      The voltage can be adjusted upward by press this button when the DC jack port is output and          the Dip switch is at the adjustable mode(0000 or 0001).This button is invalid when the Dip              switch is not at the adjustable mode . 7.    Voltage down push button       The voltage can be adjusted downward by press this button when the DC jack port is output             and the Dip switch is at the adjustable mode(0000 or 0001). This button is invalid when the Dip       switch is not at the adjustable mode.  8.   Voltage & current multi meter       Voltage range: 21.0V - 00.0V, Current range: 9.99A - 0.00A 9.   Dip switch setting table l Please make sure have set the all of switches(dip switch & function switch & QC/PD switch) already before connect any power supply device(power bank/wall charger/car charger), and don’t adjust the all of switches on line when there is voltage output. It must unplug the USB-C input before to change the setting for all of switches or connected the loading device to avoid be damaged connected loading device . Remark:  l  The capability of output voltage & current is based on the output voltage of the power supply device (power bank, power adapter, car charger). It can't output PD voltage even set on PD output state if the power supply device without PD function. And also you can't use 1A output of power supply device to drive over 1A demand loading device; it will let the power supply device's output shut down . l when dip switch is set at fixed output, the voltage up and down push button are invalid. l When you test only 5V & 14.5V output of PD AC power adapter by manual operation of PD test . you must press the two times of the voltage up push button when the 5V output ; then the 14.5V will output & display ; due to it without 9V output .       Packaging & Shipping   Our Services  Warranty one-year