Specifications 3 in 1 Automatic drinking bottled water filling machine
2Model:CGF24-24-8
3Productivity:8000BPH
4Material:Stainless steel304
3 in 1 Automatic drinking bottled water filling machine Features:This water filling machine is with bottle rinsing, filling and capping monobloc for drinking water (non-carbonated) filling.PET bottles infeed by combination of infeed grippers, equipped with bottle jam protection device, the machine applies unique overturning bottle clamp, which is an innovation of our Zhangjiagang Jiayuan machinery company . Rinsing part
PET bottles infeed by combination of infeed grippers, equipped with bottle jam protection device, the machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck postion, avoiding bottle mouth thread comtamination caused by rubber gripper block of a traditional bottle clamp. This part is made of SUS 304 stainless steel, the bottle clamp is hygienic and durable. The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use anti-corrosion maintenance free bearing and the rinser is driven by driving system positioned inside machine frame via gear transmission.
Filling part Rotary wheel fully made of stainless steel SUS 304 Gravity filling method Filling valves aer reasonably structured with accurate filling. Bottle go up and down in the function of cam through elevator to process filling with contact to bottle-mouth. Level of cylinder is controlled with float-ball Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
Capping part Capper should have highest precision, influence very much with stability and realiable of the filling monoboc. Our capper features as follows: Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspection system is applied to control on-off of elevator.
Discharge starwheel & conveyor Nylon starwheel and conveyor belt work together to discharge bottles, equipped with bottle jam protection device. Driving motor is frequency inverted to synchronize with the filling line to prevent bottles from falling Discharge conveyor is equipped with photocell switch to slow down and stop filling line in case of fallen bottles.
Machine frame
The machine frame is a welded structure of high quality carbon steel with the surface anti-rust treated and coated, the machine frame is wrapped with stainless stell SUS304.
Driving system of the 3-in-1 unit is positioned under the machine talbe. One main motor provides driving porwer via gear transmission.
The gear transmission system is an interleaved arrangement of stell gears and nylon gears.
The output shaft of the main motor is equipped overload protection to secure machine safety.
PLC electrical control system controls the fully automatic operation of the monobloc.
♥ Main Models and technical parameters
Model | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 | CGF32-32-10 |
Production capacity(500ml)(b/h) | 2000-4000 | 4000-6000 | 8000-10000 | 12000-15000(0.5L) |
Filling precision | ≤±5MM(Liquid Level) | ≤±5MM(Liquid Level) | ≤±5MMLiquid Level | ≤±5MM(Liquid Level) |
Polyester bottle standard(mm) | Bottle diameter40-80; | ≤±5MM(Liquid Level) | ≤±5MM(Liquid Level) | ≤±5MM(Liquid Level) |
Height | Height:130-280 | (Height):150-320 | (Height):150-320 | (Height):150-320 |
Suitable cap shape | Plastic Screw Cap | (Plastic Screw Cap) | Plastic Screw Cap) | (Plastic Screw Cap) |
Water pressure of Washing bottle(MPa) | 0.18 | 0.18 | 0.18 | 0.18 |
Water consumption for Water bottle (kg/h) | 800 | 1600 | 2500 | 3500 |
Spraying position | 5 | 5 | 6 | 12 |
Dripping bottle position | 3 | 3 | 3.5 | 7 |
Gas source pressure(Mpa) | normal pressure | normal pressure | normal pressure | normal pressure |
Gas consumption(m3/mm) | 0.3 | 0.3 | 0.4 | 0.5 |
Total power | 4.23 | 5.03 | 6.57 | 8.63 |
Total weight | 2000 | 3500 | 5500 | 8000 |
Dimension(L*W*H) | 2100×1500×2200 | 2450×1800×2200 | 2750×2180×2200 | 3500×2200×2250 |