24 Ports L2 10/100M Managed POE Switch

N-net 24 Ports L2 10/100M Managed POE Switch

NT-35M24F4GC  10/100M 24 ports POE switch is a high-performance, network management optional two layer Ethernet all-optical switch. Based on industrial network dedicated switching chipset, the main application of this managed switch is to provide support for Ethernet two layer exchange for the construction of network, or with the special software (optional, authentication and billing) for Ethernet access or cell broadband aggregation equipment. 

With 24 power over ethernet ports, NT-35M24F4GC optical switche can be applied to various situation easpecially long distance connecting: campus & enterprise network , residential communities, Internet broadband access, network video surveillance application environment. By using N-net L2 managed switch, will greatly shorten the network the cycle and reduce the construction cost and maintenance cost, optical fiber transmission cost-effective access solutions.

Managed POE Switch 10/100M Features

1. 24x 10/100Mbps downlink optical fiber Ethernet Ports, 2x 10/100/1000Mbps uplink Ethernet Ports and 2x1000Mbps uplink SFP Ports ,or 4x 1000M Gigabit Ethernet COMBO ports
2. IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3z
3. compatible with various Ethernet devices
4. Support L2+ Switching features including 802.1Q VLAN, Port Mirroring, Port isolation, IGMP Snooping,
5. DHCP Snooping, DHCP Relay , LACP, IP Source Guard, ARP inspection, ACLs etc.
6. Store-and-forward mechanism is employed to avoid packet loss and error frames
7. Support spanning tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1S)
8. Support IP/Port/Mac binding.
9. Jumbo frames support a maximum of 9.6K kilobtyes
10. Support enhanced management through WEB, CLI, SSH, SNMP.
11. Built-in 1U rack power supply series, easy installation

Stackable  Managed Fast Ethernet POE Switch Application

Managed 24 Ports Poe Switch Instruction:

1. Front board have 33 ports, Provide 24x 10/100Mbps downlink fiber Ethernet Ports, 2x 10/100/1000Mbps uplink Ethernet Ports or 2x 1000Mbps uplink SFP Ports; or 4x 1000M Gigabit Ethernet COMBO ports,and 1x

2. LED Indicator State:

Power:   1 green light indicates that the power normal work;

Ethernet: 28 green lights indicate that the Ethernet Link and Act

Ethernet: 28 green lights indicate that the Ethernet speed.

Installation step

Please check below device and accessories before installation, if there are missing, please contact with your supplier.

1. Fiber Switch                        1PCS

2. User Manual                        1PCS

◆ Please turn off the signal source and the device's power before installing, installation with power on may damage the device;

◆ Use 24 network cables to connect 24 industrial switch with Ethernet switch's 1~24 fiber port;

◆ Use network cable to connect Ethernet switch`s UPLINK port with NVR or Other Device;

◆ Connect Ethernet switch with power adapter;

◆ Check if the installation is correct and device is good, make sure all the connection is reliable and power for the system;

◆ Make sure every network device has power supply and work normally.

Poe Switch For Ip Camera Order information