210.6w 24v 5.9a Dual Output Switching Power Supplies For Led Driving Outdoor Display Board

SPECIFICATION

MODEL

ESH-

200W-3.3

ESH-

200W-5

ESH-

200W-7.5

ESH-

200W-12

ESH-

200W-15

ESH-

200W-24

ESH-

200W-36

ESH-

200W-48

OUTPUT

DC VOLTAGE

3.3V

5V

7.5V

9V

12V

15V

24V

48V

RATED CURRENT

40A

40A

27A

17A

14A

8.8A

5.9A

4.4A

CURRENT RANGE

0 ~ 40A

0 ~ 40A

0 ~ 27A

0 ~ 17A

0 ~ 14A

0 ~ 8.8A

0 ~5.9A

0 ~ 4.4A

RATED POWER

132W

200W

202.5W

204 W

210W

211.2W

210.6W

211.2W

RIPPLE & NOISE (max.) Note.2

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

240mVp-p

240mVp-p

VOLTAGE ADJ. RANGE

2.97 ~ 3.7V

4.5 ~ 5.6V

6 ~ 9V

10 ~ 13.5V

13.5 ~ 18V

20 ~ 26.4V

32 ~ 40V

41 ~ 56V

VOLTAGE TOLERANCE Note.3

+/-2%

+/-1%

+/-1%

+/-1%

+/-1%

+/-1%

+/-1%

LINE REGULATION

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

LOAD REGULATION

+/-2%

+/-1%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

+/-0.5%

SETUP, RISE TIME

1000ms, 16ms/230VAC  1000ms, 50ms/115VAC at full load

HOLD UP TIME

20ms/230VAC  16ms/115VAC at full load

INPUT

VOLTAGE RANGE

85 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC

FREQUENCY RANGE

47-63Hz

EFFICIENCY (Typ.)

75%

200%

79%

82%

85%

85%

87%

200%

200%

88%

89%

AC CURRENT

4.5A/115VAC  2.5A/230VAC

INRUSH CURRENT (max.)

COLD START 45A

LEAKAGE CURRENT

<3.5mA / 240VAC

PROTECTION

OVER LOAD

105-150%rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

3.8 ~ 4.9V

5.75 ~ 6.75V

9.4 ~ 10.9V

13.8 ~ 16.2V

18 ~ 21V

27.6 ~ 32.4V

41.4 ~ 46.8V

57.6 ~ 67.2V

Protection type :Shut down O/P voltage, re-power on to recover

OVER TEMPERATURE

U1 Tj 140 typically (U1) detect on main control IC

Protection type : Shut down O/P voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.

-20 ~ +50 (Refer to output load derating curve)

WORKING HUMIDITY

20-90% RH

STORAGETEMP., MIDITY

-20-+85℃, 10-95% RH

TEMP. COEFFICIENT

+/-0.03%/(0-50℃)

VIBRATION

10-50HZ

SAFETY &EMC

SAFETY STANDARDS

UL60950-1approved

WITHSTAND VOLTAGE

I/P-O/P:3KV I/P-FG:1.5KV O/P-FG:0.5KV AC

ISOLATION RESISTANCE

I/P-OP, IP/FG, OP/FG:100M OHMS/500VDC/25C/70%RH

EMICONDUCTION& DIATION

Design refer to EN55022 (CISPR22) Class A

EMS IMMUNITY

Design refer to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, light industry level, criteria A.

OTHERS

MTBF

271.9K hrs min.   MIL-HDBK-217F(25℃)

DIMENSION

215*115*50mm (L*W*H)

PACKING

0.93Kg; 12pcs/12Kg/0.92 CUFT

NOTE

1:All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2:Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3:Tolerance : includes set up tolerance, line regulation and load regulation.

4:Line regulation is measured from low line to high line at rated load.

5:Load regulation is measured from 0% to 100% rated load.

6:The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.