2016 Hot Sale New Designed Water-Well-Drilling-Machine

2016 Hot Sale New Designed Water-Well-Drilling-Machine :    Product Description    Applications And Features :   1 This small drilling machine occupies a small area ( 1square meters), a height of 3.5 meters stand, the job can be        installed in less than ten minutes.can be used at indoor and outdoor site.   2 Can be disassembled, after dismantling ,the total length is less than 2 meters, the largest component is no more          than 40 kg.Can be load on a vehicle as it is very light.   3 The well pipe is fully enclosed, shallow layer has no leakage, can ensure the health and safety of drinking water.   4 The drills has rock breaking ability. can drill 50 meters per hour. The deepest hit is 180 meters, can pierce the          hard rock accompanied by a diamond bit.   5 Research and Develop by ourself,it breaks difficult problem that easy to drill and hard to disassemble.   6 All the lifting, loading and unloading drill pipe is mechanized, time-saving, labor-saving and easy to operate.   Technical Parameters:

The Max Drilling Depth	180 m
The Max Drilling Width	300 mm
Main Machine Power	4.55 kw
The Power Of Driving Motor	1.25 kw
The Power Of Lifting Motor	1.1 kw
The Power Of Submersible Pump Motor	2.2 kw
The Drilling Pipe Rotation Speed	150 r/min
The Area Of Working Platform	1 M2
The Max Height OF Well Stand	3.5m
Maximum weight of a single piece after dismantling	40 kg
Maximum length of a single piece after dismantling	2 m
The Size Of Case1	1100X450X450mm
The Size Of Case2	670X670X450mm
The Entire Weight Of Machine	700kg
The Number Operating Person	2

   

Portable Economical Water Well Drilling Machine Design
Main Machine	HT-W150S: 42mm Dia shaft and pipe
	HT-W150T: 50mm Dia shaft and pipe
42mm Dia drilling pipe	2m/piece
	1.5m/piece
50mm Dia drilling pipe	2m/piece
	1.5m/piece
11cm and 20cm Alloy Steel Drilling Bit	can drill normal soil ground
11cm and 20cm Diamond Drilling Bit	can drill mixed rock/sand/soil ground
11cm-13cm Three-wing Diamond drilling bit	can drill rock

         Customized Drilling Bit-3 Wings   
     FAQ   1What is drilling Tip? -----It is the drilling bit at the end of the drilling pipe,it can decide the diameter of the well. We can customize the drilling bit according to your requirement.
  2 What is drilling Pipe(rod)? -------It deccides how deep you can drill a well,the material is galvanized steel.OD(outer diameter) is 42/50mm.   3 Why do you use a transformer? -----The motor used is electrical Direct Current,we will configure a voltage transformer to change the alternating current to 60V direct current. The driving force of direct current is strong enough for the very hard soil,it also can protect the operator in case of electricity leakage. Direct Curret is more stable and safe,the lifting strength is also more than the Alternating Current. The transformer can turn 220V or other voltages Alternating Current to 60V Direct Current.   4 Can we use a 220volts alternating motor for a direct use without a transformer? If no,why? We do not advise you to use 220 Volts directly,there are two reasons: ----First:220V alternating current is not stable,and the driving force is not as strong as the direct current.Sometimes you will meet the very hard soil,so you had better use the 60V direct current. ----Second:in case of the electricity leakage,220V voltage has more harm than 60V.   5 What is the suction water pump? ------With the high pressure,It is used to draw the sand,soil and other residues out of the well,and can clean the well after the well is finished.     6 For solving the problem that your local voltage can not suite our machine motor (220V) ,we can provide voltage stabilizer :  

Product Name	Function
Voltage Stabilizer(10KW)	Make 130-270 V voltage to stable 220V

    7 For solving the problem that it can not get the electricity in the wild, we also can equip gasoline or diesel  generator :     

Gasoline Generator
Model	GF-3
Output Power	6.5 kw
Output Voltage	220v/110v
Phase	Single
HZ	50 /60
Oil Tank Capacity	25 L
Displacement	420 cm3

           

Model:GF-8
Output Power:8KW	Speed:1500rpm
Output Voltage:220V/Single Phase	Start Way:Electric Start
HZ:50Hz	Noise(LP7m):90dB(A)
Motor	Pure Copper Wire
Driving Way	Belt Driving
Weight	230KG
Dimension	1250×600×650(L×W×H mm)

      Packaging & Shipping                       

Related Products

1 Hydraulic Diesel Power-W200   2 Hydraulic Pneumatic For Rock-R150

      Our Services   High quality with low price :
Focus on water filter area,our factory has more than 20 years of professional experience,the price is directly from factory to our clients.   Multiple delivery choice :
We have big discount with forwarder,keep the goods reach yourside fast and safety.   Customer First, Credit-based :
7 x 24 hours service,every equiry will be treated carefully by us with authentic and quick replying.       Company Information