2015 Yuhong rock salt hammer crusher hot selling 1.Rock Salt Hammer Crusher FeatruesThe main advantage of the hammer crusher: Simple and compact structure; High output; Large crushing ratio, uniform particle size, less prwder, less power consumption of the unit product, etc.
Hammer crushers' features:
1 Hammerhead, adoption of new casting technology, has wear-resisting and impact resistance.
2 Adjusting the production granularity according to customers' requirements.
3 Adopting the seal body structure in order to solve the dust pollution and ash leakage problem of the workshop.
4 One of the upgrading products and the overall design is of attractive appearance, compact structure, less wearing parts, easy maintenance.
2. Rock Salt Hammer Crusher Introduction:Our Hammer crusher series products are applicable to crushing middle hard and brittle materials, such as limestone, coal, salt, gyp, alum, brick, tile and coal gangue, etc with the compression strength less than 150Mpa and moisture less than 15%. This machine is mainly used to the industries of cement, coal dressing, generate electricity, construction materials and compound fertilizer etc. It can make the different sizes materials into equal size for the next procession with features of reliable structure, high efficiency and easy to use. So it has been deeply favored by the customers. The hammer crusher can also be applied for crushing fiber structure, scrap wood which has strong elasticity and toughness, waste paper, broken asbestos cement, etc. In addition, the hammer crusher not only can be used for stone crushing production line, sand making production line but also can be used interchangeably with other products.
3. Rock Salt Hammer Crusher Working Principle:The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size.
Hammer Crusher (1)
Diesel Engine Mobile Hammer Crusher :
Model |
Rotor speed (r/min) |
Feed opening size (mm) |
Max feeding size (mm) |
Discharghing size (mm) |
Capacity (t/h) |
Motor power (kw) |
Weight (t) |
Overall dimensions L×W×H (mm) |
PC400×400 |
1500 |
145×295 |
100 |
0-30 |
5-8 |
7.5 |
0.9 |
844×942×878 |
PC600×400 |
1000 |
295×450 |
100 |
0-35 |
10-12 |
18.5 |
1.5 |
1000×1000×1300 |
PC600×600 |
1000 |
295×570 |
100 |
0-35 |
12-18 |
45 |
2.14 |
1315×840×1501 |
PC800×600 |
1000 |
350×570 |
120 |
0-45 |
20-25 |
55 |
2.45 |
1515×2586×1040 |
PC800×800 |
1000 |
350×850 |
120 |
0-45 |
35-45 |
55 |
3.05 |
1515×2831×1040 |
PC1000×800 |
1000 |
580×580 |
200 |
0-45 |
25-40 |
110 |
6.5 |
3206×2210×1515 |
PC1000×1000 |
1000 |
580×1060 |
200 |
0-45 |
40-80 |
132 |
7.59 |
3514×2230×1515 |
PC 1250×800 |
750 |
650×850 |
200 |
0-45 |
20-50 |
132 |
11.7 |
2630×1780×2050 |
PC1250×1250 |
750 |
650×1330 |
200 |
0-45 |
90-110 |
185 |
13.2 |
2630×2180×2050 |
PC1400×1400 |
750 |
1050×1540 |
250 |
0-45 |
120-170 |
280 |
17.2 |
2790×2800×2310 |
PC1600×1600 |
600 |
1500×1785 |
350 |
0-60 |
220-280 |
450 |
22.8 |
3350×3120×2660 |