2015 TOP quality led driver for led street light/single channel constant current,0-10V/PWM/auto/PLC intelligent dimming control

2015 TOP quality led driver for led street light/single channel constant current,0-10V/PWM/auto/PLC intelligent dimming control
  Technical specification/data sheet of led driver:  

Specification:
Model	Power factor	THD	Inner Temp. rise	Output power	Input Voltage
WLED-MSC-100-3000T	≥0.98	≤20%	-30℃~+70℃	108W	AC 90V~267V

 

Output Current	3000mA
Current Accuracy	±3%
Output Power	108W
DC Voltage	36V
Compliance Voltage	27~36V	Constant current mode running under the condition of 65% ~ 100% nominal output voltage,and it suitable for LED.
Ripple&Noise(Max)	200mVp-p	The measuring method of ripple and noise:using a twisted-pair,and it’s terminal parallel connection 0.1uf with 47uf capacitance,be measured under the 20m bandwidth.
Line Regulation Rate	±3%
Load Regulation Rate	±3%

Items	Parameters	Notes
Voltage Range	90~267VAC	Need deduction under low voltage output, the specific situation please refer to the static-characteristic-curve.
Frequency Range	47-63Hz
PF	≥0.98
THD	≤20%	The maximum input voltage
Efficiency	90%	Maximum
Input current	1.0A/120VAC

Items	Parameters	Notes
Over Temperature Protection	130±10℃
Short Circuit Protection	Yes	Hiccup mode, automatic recovery after elimination abnormal status
Over Current Protection	110%	Protected mode: The output current exceeds 110%, enters hiccup mode.
Over Voltage Protection	44~48V

Items	Parameters	Notes
Working Temp	-30~+70℃	Need deduction under the high temperature environment condition,the specific situation please refer to the deduction-curve.
Working Humidity	20~95%RH,Non-condensing
Storage Temp&Hum.	-40~+80℃,10~95%RH
Vibration Resistance	10~500Hz,5G 12min/cycle, X,Y,Z axes each 72min

Items	Parameters
Surge Current	Cold start 50A/230VAC
Leak Current	<0.75mA/240VAC
Driven Dimensions	LxWxH=159mm*85mm*51mm
Weight	0.8kg
Waterproof Grade	IP67

Items	Standards
UL/CUL	UL8750,UL1021,CSA-C22.2 NO107.1
CE	EN61347-1,EN61347-2-13
Insulation Resistance	I/P-O/P,I/P-FG,OP-FG:>100M Ohms/500VDC/25℃/70%RH
Withstand Voltage	I/P-O/P:3.75KAC,I/P-FG:2KVAC,O/P-FG:0.5KVAC
EMC Emission	EN55015,EN61000-3-2,EN61000-3-3
EMC Immunity	EN61000-4-2,3,4,5,6,8,11,EN61547
UL/CUL	UL8750,UL1021,CSA-C22.2 NO107.1
CE	EN61347-1,EN61347-2-13

   
Dimensions and drawing: Our Advantages and main feactures of led driver transformers:   Single channel constant current output   world-wide university AC input:90-305Vac   Built- in active power factor correction function   Lighting protection: CM4KV, DM6KV   ALL-Round protection:SCP,OVP,OTP   Suit for dry, damp and wet locations    5years warranty   Other Features of led driver:   1.Higher PFC>0.98 and low THD<10%   2.Smart and lighter design , easy to install.   3. No fan, good waterproof performance, maintenance-free    4.Soft start, constant wattage output Ballast noise rated class A      5.CE, FCC, UL, CUL, ROHS are approved   6.Prolong lamp life at least 20%   7. Energy-saving at least 30% compared with magnetic ballast   8.Comprehensive protection: short-circuit/ open circuit/overheat/lamp failure protection   9. Dimmable: 50%-100% , Elimination of lamp flicker   10. Maximum lighting distance: 18m   11. High power led white glue injection makes good sealability and good heat dissipation   Professional R&D by working with Zhejiang University makes the best structure to get best performance.     Dimming Options:   no dimming   potentiometers dimming   0-10v/PWM dimming    Programmable dimming    Timing dimming   PLC intelligent control
Factory View: Application: suit for wet, damp,dry places, IP67 1.Hydroponic/Horticulture/Green house/seeding/farm/flower exhibition/garden/bonsai/aqurium lighting; 2. Outdoor commercial and Architectural lighting,street and tunnel lighting; 3. Fishing lighting   Application photos of led drivers: Our Internation tradeshow: Fast feedbacks to any of your questions, welcome to visit our factory.