Specifications wheel sand washer:
1. high efficiency washing
2.Good corrosion resistance
3.High quality
Description wheel sand washer is ideal for scrubbing difficult materials such as tough insoluble clays,conglomerates,soft stone and cemented aggregate.Our Washers are ideal for scrubbing difficult material.Tough insoluble clays, conglomerates and soft stone,and certain cemented aggregates are too difficult to clean properly in normal screw machines.The washer thoroughly scouring,breaks down,and cleans the toughest materials.These high quality,highly durable machines perform well under the toughest clay conditions with minimum power,water and downtime.
Main features High capacity
Heavy duty conveying paddles Fabricated with heavy duty tubs
Oversize bearings and gears
Thick-walled shafts
Lower end bolted to fully machined stub shaft.Upper end mounted through flexible coupling to output shaft of gearbox The compound drive divides the operating load over an optimal combination of over sized helical and spur gears
Continuous grinding and abrading log washer paddles
Application Iron Ore Gravel Crushed Rock Recycled Material Most kinds of bulk material that needs washed
Main technical datas
Type | Drum Dimension(mm) | Screen Size (mm) | Rotate Speed (r/min) | Feeding Size (mm) | Water Consumption (m3/h) | Capacity (t/h) | Power (kw) | Weight (t) |
GTX1030 | Φ1000×3000 | ≤20 | 27.9 | ≤80 | 1 | 40 | 15 | 3.8 |
GTX1230 | Φ1200×3000 | ≤25 | 27.6 | ≤100 | 1.3 | 70 | 22 | 4.7 |
GTX1430 | Φ1400×3000 | ≤25 | 27.6 | ≤100 | 1.5 | 80 | 22 | 4.9 |
GTX1545 | Φ1500×4500 | ≤25 | 21 | ≤160 | 1.7 | 120 | 30 | 6.9 |
GTX2265 | Φ2200×6500 | ≤50 | 19 | ≤230 | 1.8 | 180 | 37 | 15. |
Notes 1.Above are just for your reference,due to different requests in order to meet your needs. 2.If any change,all parameters and overall dimensions are subject to operating instructions. 3.Any questions please feel free to contact us. Warranty 100% brand new when leaving the factory.The seller guarantee quality of the machines for a period of one year from the date of trial run finish,but not to exceed thirteen months from date on which machines away to the delivery port.If any parts (excluding easily damaging parts) are found defective in quality in the first year,the seller should replace free-of-cost.After one year,parts can be replaced on favorable payment basis.
First-rate After-service 1.Provide consultation services for customers, determine operational scales, and provide factory-establishing plans. 2.Freely install, debug, and provide relevant technical training. 3.Strict carry out three guarantees (guaranteed quality, guaranteed quantity and guaranteed repair), and contains technical consultation. 4.Ensure spare parts and components available adequately and timely. 5.The Project Report will be made according to the client's actual requirements. 6.Further business,further discussions.